Soil Compacting
Show/hide table
 | |
| Illustration 1 | g00514699 |
Lower the blade to ground level. Operate the compactor in a straight line across the site.
Move the transmission control to SECOND SPEED. If the engine slows down, move the transmission control to FIRST SPEED.
When you reach the end of the site, move the transmission control to REVERSE. Straddle the path which was created by the previous pass and back up in a straight line.
Raise the blade to approximately 50 cm (18 inches) above ground level in order to prevent material from being forced under the machine.
While you move the compactor backward, move the blade control lever to the FLOAT position in order to help to level the site.
Caterpillar Information System:
3406E On-Highway Engine Engine Oil Filter Base - Disassemble
3176C and 3196 Industrial Engines Inlet Manifold - Install
554 Forwarder and 574 Forwarder Engine Speed Control
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0738 FMI 04 Position Sensor (Ripper) Voltage Below Normal - Test
3406E On-Highway Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
3176C and 3196 Industrial Engines Inlet Manifold - Remove
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Hydraulic System Hoist Cylinder
784C and 785C Off-Highway Truck/Tractors Capacities (Refill)
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
784C and 785C Off-Highway Trucks Machine Systems Metering Pump (Steering) - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Gear Pump (Steering and Brake Circuit)
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Metering Pump (Steering)
AP-1055B and BG-2455C Asphalt Pavers Screed Counterbalance Control
583R Pipelayer Power Train Case and Frame (Hardbar)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Power Train Electronic Control System
773D Off-Highway Truck and 775D Quarry Truck Radiator Core - Clean
773D Off-Highway Truck and 775D Quarry Truck Hydraulic System Hoist Cylinder
3406C Engines for Caterpillar Built Machines Piston and Rings - Two-Piece Articulated Piston
AP-1055B and BG-2455C Asphalt Pavers Auger Auto/Manual Control
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Install
554 Forwarder and 574 Forwarder Machine Speed Control