Auger Auto/Manual Control
Show/hide table
Illustration 1 | g00514852 |
The"Auto/Manual"switches are located on the operator panel.
"AUTO" Move the left switch (1) upward for automatic operation of the left auger. Move the right switch (2) upward for automatic operation of the right auger. When the switch is placed in the AUTO position, the auger speed will be determined by the position of the feeder control paddle or the signal from the optional sonic feeder control sensor.
"MANUAL" Move the left switch (1) downward for manual operation of the left auger. Move the right switch (2) downward for manual operation of the right auger. Placing the switch in the MANUAL position will cause the augers to run at maximum speed. The MANUAL position is spring loaded in order to return the switch to the OFF position.
Caterpillar Information System:
3406C Engines for Caterpillar Built Machines Piston and Rings - Two-Piece Articulated Piston
773D Off-Highway Truck and 775D Quarry Truck Hydraulic System Hoist Cylinder
773D Off-Highway Truck and 775D Quarry Truck Radiator Core - Clean
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Power Train Electronic Control System
583R Pipelayer Power Train Case and Frame (Hardbar)
AP-1055B and BG-2455C Asphalt Pavers Screed Counterbalance Control
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Metering Pump (Steering)
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Gear Pump (Steering and Brake Circuit)
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Remove
824G , 825G and 826G Landfill Compactor Soil Compacting
3406E On-Highway Engine Engine Oil Filter Base - Disassemble
3176C and 3196 Industrial Engines Inlet Manifold - Install
3304B and 3306B Engines for Caterpillar Built Machines Water Pump - Install
554 Forwarder and 574 Forwarder Machine Speed Control
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Hydraulic System Hoist Cylinder Mounting
980G Wheel Loader Machine Systems Parking Brake Actuator - Remove and Install
AP-1055B and BG-2455C Asphalt Pavers Auger Raise/Lower Control
3406E On-Highway Engine Engine Oil Pump - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Power Take-Off
527 Track-Type Skidder Hydraulic System Testing and Adjusting
3406E On-Highway Engine Crankshaft - Remove
3176C and 3196 Engines For Caterpillar Built Machines Front Cover - Remove
3176C and 3196 Engines For Caterpillar Built Machines Front Cover - Install
554 Forwarder and 574 Forwarder Bogie Control - If Equipped