Alternate Exit
Show/hide table
Illustration 1 | g00871218 |
The right side window can be used as an alternate exit. The window can be opened from the inside of the cab and from the outside of the cab.
Note: Unlock the alternate exit before you begin operation. The operator will not be able to open the alternate exit if the door is locked.
Show/hide table
Illustration 2 | g00871222 |
Outside View of the Alternate Exit Handle |
Pull the handle on the gas spring in order to disconnect the ball joint from the window. The window can now be opened.
Show/hide table
Illustration 3 | g00871295 |
Inside View of the Alternate Exit Handle |
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Metering Pump (HMU)
527 Track-Type Skidder Track Pins - Inspect
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0468 FMI 04 Position Sensor (Brake Pedal) Voltage Below Normal - Test
527 Track-Type Skidder Rollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) - Inspect
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering Cylinder
527 Track-Type Skidder Recoil Spring Compartment Oil Level - Check
773D Off-Highway Truck and 775D Quarry Truck Hydraulic System Gear Pump (Hoist and Brake)
3524B Engines for Off-Highway Trucks Engine Cranks but Will Not Start
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
824G , 825G and 826G Landfill Compactor Caterpillar Monitoring System
D250E Series II and D300E Series II Articulated Trucks Machine Systems Equalizer Arm - Remove
3406E On-Highway Engine Cylinder Head - Remove
D250E Series II and D300E Series II Articulated Trucks Machine Systems Equalizer Arm - Install
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Install
527 Track-Type Skidder Track Roller Frame - Inspect
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hoist Cylinder - Remove
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Remove
784C and 785C Off-Highway Trucks Machine Systems Steering Column - Remove
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0615 FMI 03 Position Sensor (Articulation) Voltage Above Normal - Test
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Install
784C and 785C Off-Highway Trucks Machine Systems Steering Column - Install
554 Forwarder and 574 Forwarder Tilt Hood
3176C and 3196 Engines For Caterpillar Built Machines Water Temperature Regulator - Remove and Install