Turbocharger - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| |
| Illustration 1 | g01031556 |
- Remove tube assemblies (2) and (3) from turbocharger (1). Check the condition of the O-ring seals on tube assemblies (2) and (3). Use new parts for replacement if the O-ring seals are worn or damaged.
Show/hide table
Illustration 2 g01031557 - Attach a suitable lifting device to turbocharger (1).
- Remove bolts (4) and turbocharger (1). The weight of the turbocharger is approximately
34 kg ( 75 lb) .
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Aftercooler - Install
527 Track-Type Skidder Hydraulic System Arch Lift Cylinder
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Articulated Hitch
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Priority Valve
527 Track-Type Skidder Hydraulic System Bulldozer Tilt Cylinder
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering and Brake Manifold Valve
D250E Series II and D300E Series II Articulated Trucks Machine Systems Service Brake Control Valve - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Gear Pump
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Flow Switch
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Check Valve
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Track - Tension or Detension
527 Track-Type Skidder Fuel System Secondary Filter - Replace
527 Track-Type Skidder Hydraulic System Implement Control Valves
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Track Gauge Spacing
527 Track-Type Skidder Fuel System - Prime
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Electric Drive Pump (Secondary Steering)
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Double) - Assemble
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Double) - Disassemble
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Center Arm (Steering) - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0468 FMI 03 Position Sensor (Brake Pedal) Voltage Above Normal - Test
D250E Series II and D300E Series II Articulated Trucks Power Train Solenoid Valve (Differential Lock) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering Control