Retarder - Disassemble
Disassembly Procedure
Start By:
- Separate the retarder from the torque converter. Refer to Disassembly and Assembly, "Torque Converter and Retarder - Separate". The information is in this manual.
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0520     | Driver Group     | 1     |
B     | 5P-5197     | Pliers     | 1     |
- Remove four bolts (1) and retainer (4) in order to remove bearing (2) and bearing race (3) from stator (5) .
Show/hide table
Illustration 1 | g00509081 |
- Turn stator (5) over 180 degrees. Use Tooling (A) and a hydraulic press in order to press bearing (2) and bearing race (3) from stator (5) .
Show/hide table
Illustration 2 | g00509138 |
- Use Tooling (B) in order to remove retaining ring (6) from rotor (7) . Remove seal ring (9) from rotor (7) . Remove ring carrier (8) from rotor (7) .
Show/hide table
Illustration 3 | g00509139 |
Caterpillar Information System:
784C and 785C Off-Highway Trucks Machine Systems Lighter and Power Receptacle - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Brake Application Pressure Test
527 Track-Type Skidder Mounting and Dismounting
784C and 785C Off-Highway Trucks Machine Systems Pressure Switch (Stop Light) - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Air System
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Transmission Planetary
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering System Check
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Accumulator Manifold - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Lift or Tilt Cylinder Sensor - Troubleshoot
784C and 785C Off-Highway Trucks Machine Systems Pressure Protection Valve (Service Brake) - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Air System
784C and 785C Off-Highway Trucks Machine Systems Cover (Cab Rear) - Remove and Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Service and Parking Brake (Rear) - Assemble
D250E Series II and D300E Series II Articulated Trucks Power Train Torque Converter - Assemble
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Retarder Control) - Remove and Install
527 Track-Type Skidder Power Train Transmission Hydraulic Control
583R Pipelayer Power Train Transmission
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Service Brake) - Remove and Install
527 Track-Type Skidder Power Train Transmission Oil Filter
3054 Engine Crankshaft Seals
583R Pipelayer Power Train Transmission Control Linkage
527 Track-Type Skidder Model Views and Specifications
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Diode Assembly - Test