Personal injury or death can occur if personnel are trapped between the wheel and the frame. The steering system is hydraulically controlled and wheels can crush personnel during movement. Use caution when working between the wheels and the frame. If the wheels must be turned, ensure that all personnel are clear of the machine before any movement. |
Illustration 1 | g00519018 |
Illustration 2 | g00519017 |
- Remove the filter elements. Inspect the filter elements. Refer to Operation and Maintenance Manual, "Oil Filter - Inspect" in order to evaluate the used filter elements. Discard the used filter elements into a suitable container.
- Install the new filter elements.
Show/hide table
Illustration 3 g00791820 - Maintain the oil level to the "FULL COLD" mark in the upper sight gauge.
- Start the engine and operate at low idle. Check for leaks and make any necessary repairs.
- Observe the oil level. The transmission must be in the NEUTRAL position and the parking brake must be engaged. The oil level should be at the "FULL WARM" mark in the upper sight gauge when the oil is warm.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin. |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |