Engine Oil Filter Base - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 2P-8250 | 带式扳手总成 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
机器做检查、保养、测试、调整和修理时，必须小心，不让油液流出。 在打开任何舱室或解体任何储有液体的零件之前，要准备好合适的容器收集流出液体。 有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器，请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。 按照本地法规和指令处置所有液体。 |
- 使用工具 (A) 从发动机机油滤清器底座 (1) 上拆下机油滤清器。
Show/hide table
 | |
| 图 1 | g00499430 |
- 拆下螺栓 (5) 、管组件 (3) 和密封垫。 拆下管组件 (3) 中 O 形密封圈，并且如有必要，更换 O 形密封圈。
Show/hide table
 | |
| 图 2 | g00499568 |
- 拆下将管组件 (4) 固定到缸体上的螺栓。 拆下管组件 (4) 和密封垫。 拆下管组件 (4) 中 O 形密封圈，并且如有必要，更换 O 形密封圈。
- 从缸体上拆下四根螺栓 (2) 和发动机机油滤清器底座 (1) 。 如有必要，从发动机机油滤清器底座 (1) 上拆下 O 形密封圈。
Caterpillar Information System:
836G Landfill Compactor and 834G Wheel Dozer Throttle Lock Control
980G Wheel Loader Power Train Transmission Oil Pump - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Hydrostatic System (Standard) - Test and Adjust
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Pump
836G Landfill Compactor and 834G Wheel Dozer Axle Oscillation Bearings - Lubricate
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Troubleshooting
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Hydraulic System
836G Landfill Compactor and 834G Wheel Dozer Hydraulic Lockout Control
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train General Troubleshooting Information
583R Pipelayer Power Train Recoil Spring - Remove
988G Wheel Loader Articulation Bearings - Lubricate
988G Wheel Loader Alternator - Inspect
24H Motor Grader Hydraulic and Steering System Rock Guard (Blade)
966G Wheel Loader and 972G Wheel Loader Power Train Electronic Control Module (Power Train) - Replace
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0100 FMI 03 Pressure Sensor (Engine Oil) Voltage Above Normal - Test
784C and 785C Off-Highway Trucks Machine Systems Brake Valve (Parking and Secondary) - Remove
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine and Torque Converter - Separate and Connect
836G Landfill Compactor and 834G Wheel Dozer Backup Alarm - Test
980G Wheel Loader Power Train Transmission Hydraulic Control Valve - Remove
583R Pipelayer Machine Systems Winch Control Valve - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Loader Frame and Rear Frame - Separate
938G Wheel Loader and IT38G Integrated Toolcarrier Lifting and Tying Down the Machine
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Relief Valve (Main) - Test and Adjust
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0100 FMI 04 Pressure Sensor (Engine Oil) Voltage Below Normal - Test