Control Valve (Hoist) - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 2 |
- Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
- Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Show/hide table
Illustration 1 g00482780 - Attach Tooling (A) to hoist control valve (3). Fasten a suitable lifting device to Tooling (A). Secure the lifting device to a suitable hoist. Position control valve (3), as shown. Install three bolts (14) and the washers. The weight of control valve (3) is
79 kg (175 lb) .Show/hide tableIllustration 2 g00482641 - Connect two hose assemblies (13) to hoist control valve (3).
Show/hide table
Illustration 3 g00549790 - Connect hose assembly (7) to hoist control valve (4). Connect wiring harness (8) at the electrical connection. Install a new tie strap (6).
Show/hide table
Illustration 4 g00549789 Show/hide tableIllustration 5 g00549788 - Connect hose assembly (5) to tube assembly (1).
Show/hide table
Illustration 6 g00549786 - Connect tube assembly (1) to hoist control valve (4). Connect two hose assemblies (2) and (3) to hoist control valve (4).
- Fill the hoist and brake hydraulic tank. Refer to Operation and Maintenance Manual, "Hoist and Brake Tank Oil - Change". The capacity of the hoist and brake hydraulic tank is
132 L (35 US gal) .
End By:
- Remove the retaining ring and pin (body). Refer to Disassembly and Assembly, "Retaining Ring and Pin (Body) - Remove and Install".
Caterpillar Information System:
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Transmission Electronic Control Module (ECM)
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0681 FMI 05 Solenoid Valve (Parking Brake) Current Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) VIMS History
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Service Lamp
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Payload Lamps
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Action Alarm
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Action Lamp
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Related Components
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Drive Shaft - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Hydraulic Caliper Service Brake - Remove
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0681 FMI 03 Solenoid Valve (Parking Brake) Voltage Above Normal - Test
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0627 FMI 04 Brake Switch (Parking) Voltage Below Normal - Test
IT62G Series II Integrated Toolcarrier Material Handling Arm Rated Load
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Fan Guard - Remove and Install
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0681 FMI 06 Solenoid Valve (Parking Brake) Current Above Normal - Test
Topcon® System Five Reference Material
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Fan and Fan Drive - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Evaporator Coil - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Service and Parking Brake (Rear) - Remove
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0700 FMI 02 Position Sensor (Transmission Gear) Incorrect Signal - Test
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Service and Parking Brake (Rear) - Install
Electronic Modular Control Panel II (EMCP II) For MUI Engines EMCP Electronic Control (AC Transformer Box) - Replace
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0701 FMI 02 Speed Sensor (Transmission Output) Incorrect Signal - Test
IT62G Series II Integrated Toolcarrier Pallet Fork Rated Load