Plate Locations and Film Locations
The Product Information Number (PIN) is used to identify a powered machine that is designed for an operator to ride.
Products such as earthmoving equipment that are not designed for an operator to ride are identified by Serial Numbers. Also, most major attachments are identified by Serial Numbers.
For quick reference, record the identification numbers in the spaces below the illustrations.
Show/hide table
 | |
| Illustration 1 | g00739380 |
This is the Product Information Plate. The plate is located at the right rear corner of the machine.
Service Information Number (SIN)____________________
Product Information Number (PIN)____________________
Show/hide table
 | |
| Illustration 2 | g00739544 |
The Engine Serial Number and the Engine Information Plate is on top of the engine near the governor. The Governor Information Plate is located on the governor.
Show/hide table
| Engine Serial Number, Engine Information, and Governor Information Plates | |
| Engine Serial Number | |
| Engine Information Plate | |
| Governor Information Plate | |
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Hydraulic Oil Lines
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement Control Valves - Parallel Logic
3406C Engines for Caterpillar Built Machines Fuel Transfer Pump
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement Control Valves - Flow Priority
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Battery - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Pump Drive
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Transmission Heater
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Pressure and Flow Compensator Valve
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Pilot Control Valve - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement Hydraulic Pump
550, 570 and 580 Wheel Harvesters Oil Filter (Power Train Charging System) - Replace
980G Wheel Loader Braking System Limit Switch (Transmission Neutralizer) - Adjust
515 Wheel Skidder and 525 Wheel Skidder Equipment Lowering with Engine Stopped
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Control Valve
AP-1000B and BG-260C Asphalt Pavers Engine Start Switch
789B Off-Highway Truck Air System and Brakes Brake Valve (Parking and Secondary)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Aftercooler - Remove
G3B, K3A and L3A Denso Alternators Alternator - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Steering Frame Lock - Separate and Connect
Field Installation of Ride Control Kits{5004} Field Installation of Ride Control Kits{5004}
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Radiator - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake Accumulator - Test and Charge
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake System Air - Purge
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake Valve Inching - Test