Equipment Lowering with Engine Stopped
Before you lower an attachment, make sure that no one is in the area around the machine.
Note: For machines with electrohydraulic controls, the engine start switch must be in the ON position in order to lower an attachment. After the attachments are lowered, turn the engine start switch to the OFF position.
Move all control levers to the LOWER position in order to lower the attachments to the ground or onto the trailer. The control levers will return to the HOLD position when the control levers are released.
Caterpillar Information System:
AP-1050B and BG-245C Asphalt Pavers Plate Locations and Film Locations
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Hydraulic Oil Lines
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement Control Valves - Parallel Logic
3406C Engines for Caterpillar Built Machines Fuel Transfer Pump
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement Control Valves - Flow Priority
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Battery - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Pump Drive
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Transmission Heater
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Pressure and Flow Compensator Valve
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Pilot Control Valve - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement Hydraulic Pump
550, 570 and 580 Wheel Harvesters Oil Filter (Power Train Charging System) - Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Control Valve
AP-1000B and BG-260C Asphalt Pavers Engine Start Switch
789B Off-Highway Truck Air System and Brakes Brake Valve (Parking and Secondary)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Aftercooler - Remove
G3B, K3A and L3A Denso Alternators Alternator - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Steering Frame Lock - Separate and Connect
Field Installation of Ride Control Kits{5004} Field Installation of Ride Control Kits{5004}
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Radiator - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake Accumulator - Test and Charge
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake System Air - Purge
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Brake Valve Inching - Test
517 Track-Type Skidder Power Shift Transmission Testing and Adjusting