3406C Engines for Caterpillar Built Machines Caterpillar


Engine Design

Usage:

627F 1DL



图 1g00284836

气缸和气门的位置

(A) 进气门 (B) 排气门

缸径 ... 137 mm (5.4 in)

冲程 ... 165 mm (6.5 in)

排量 ... 14.6 L (891 cu in)

气缸布置 ... 直列式

每气缸气门数 ... 4

为检查发动机气门间隙的设定值,发动机必须是冷机且发动机必须停止。 发动机气门间隙设定值

进气 ... 0.38 mm (.015 in)
排气 ... 0.76 mm (.030 in)

发火顺序(喷油顺序) ... 1、5、3、6、2、4

曲轴旋转 ... 逆时针

从泵轴端,查看燃油泵凸轮轴的旋转方向。 燃油泵凸轮轴的旋转方向 ... 逆时针

注: 发动机的前端是与飞轮端相对的另一端。 发动机的左侧和右侧是通过从飞轮端观看发动机来确认的。 编号 1 的气缸是前气缸。

Caterpillar Information System:

Electronic Modular Control Panel II (EMCP II) For MUI Engines System Communication Module (Customer)
Electronic Modular Control Panel II (EMCP II) For MUI Engines Customer Interface Module
Electronic Modular Control Panel II (EMCP II) For MUI Engines Synchronizing Lights Module With Reverse Power Relay
572R Pipelayer Hydraulic System Pipelayer Hydraulic System
938G Wheel Loader and IT38G Integrated Toolcarrier Parking
Electronic Modular Control Panel II (EMCP II) For MUI Engines Synchronizing Lights Module
793B Off-Highway Truck Air System and Brakes Rear Wheel
554 Forwarder and 574 Forwarder Before Starting Engine
Electronic Modular Control Panel II (EMCP II) For MUI Engines Alarm Module Control (Custom)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Battery Hold-Down - Tighten
TK711, TK721, TK722 and TK732 Track Feller Bunchers Battery - Clean
Electronic Modular Control Panel II (EMCP II) For MUI Engines Alarm Module Control (NFPA 110)
3304B and 3306B Engines for Caterpillar Built Machines Automatic Timing Advance - Install
3304B and 3306B Engines for Caterpillar Built Machines Automatic Timing Advance - Disassemble
784B and 785B Off-Highway Truck/Tractors Power Train Relay Valve (Lockup Clutch)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Piston Pump (Drum Propel)
980G Wheel Loader Braking System Accumulator Charging Valve (Brake) - Test and Adjust
3304B and 3306B Engines for Caterpillar Built Machines Automatic Timing Advance - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Gear Group (Front) - Remove
G3B, K3A and L3A Denso Alternators T1 Alternator Output - Test
3304B and 3306B Engines for Caterpillar Built Machines Gear Group (Front) - Install
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Hood (Front) - Remove and Install
793B Off-Highway Truck Hydraulic System Control Valve (Hoist)
793C Off-Highway Truck Machine Systems Front Wheel Bearings - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.