Illustration 1 | g00466858 |
Trailer Connector - A ISO seven-pin connector is mounted to the left of the left implement quick coupler valve at the rear of the machine. Use the seven-pin connector to power electrical systems on implements. |
Lift the cover in order to access the connector.
Illustration 2 | g00466863 |
(1) Left turn signal (2) Floodlights (3) Ground (4) Right turn signal (5) Right tail light (6) Stop lamp (7) Left tail light (8) Auxiliary A |
Note: Auxiliary A is controlled from the switch on the dash panel.
When the implement's electrical system does not match the trailer connector, construct an adapter harness assembly. Use a 366 131.0 Connector Plug to make the harness. A 366 131.0 Connector Plug is available from any CLAAS dealer.
See the implement's operator's manual for electrical requirements for the implement.
Illustration 3 | g00466910 |
Pin (8) is controlled by rocker switch (9). Press the top of the rocker switch in order to activate pin (8). Press the bottom of the rocker switch in order to deactivate the pin.