Bulldozer Angle Control
Show/hide table
Illustration 1 | g00446859 |
Torque for all 3/8 locknuts (jam nuts) that hold the rod ends on the rods ... 14 ± 4 N·m (10 ± 3 lb ft)
Adjustment Procedure
- Put the bulldozer angle control valve in the HOLD position.
- Adjust the length of rod assembly (3) so that center line (B) is in line with center line (A) of the lower pivot (± 3 mm (± 0.12 inch)).
- Adjust control handle (1) to a comfortable position.
See Hydraulic Specifications, "Bulldozer Lift Control" and Hydraulic Specifications, "Bulldozer Tilt Control" for adjustment procedures.
Caterpillar Information System:
527 Track-Type Skidder Hydraulic System Bulldozer Tilt Control
527 Track-Type Skidder Hydraulic System Bulldozer Lift Control
517 Track-Type Skidder Hydraulic System Arch Lift Cylinder
517 Track-Type Skidder Hydraulic System Bulldozer Angle Cylinder
517 Track-Type Skidder Hydraulic System Bulldozer Tilt Cylinder
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Measuring Arm Cylinder
966G and 972G Wheel Loaders Power Train Differential Pinion - Assemble
517 Track-Type Skidder Hydraulic System Bulldozer Lift Cylinder
527 Track-Type Skidder Hydraulic System Inlet Manifold
527 Track-Type Skidder Hydraulic System Arch Control Valve
966G and 972G Wheel Loaders Power Train Differential Pinion - Disassemble
793C Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Assemble
527 Track-Type Skidder Hydraulic System Grapple Control
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hydraulic Tank - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Tilt Cylinder - Install
517 Track-Type Skidder Hydraulic System Hydraulic Pump
D7R Track-Type Tractor Power Train Magnetic Screen
320B, 320B L and 320B N Excavators Battery or Battery Cable - Inspect/Replace
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Saw Cylinder
793B Off-Highway Truck Seat
DASA 280 Measuring and Control System Diameter Sensor - Inspect
928G Wheel Loader Air Conditioner Condenser - Clean
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hydraulic Tank - Remove
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Holding Arm Cylinder