Center Arm (Steering) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-7505 | Hydraulic Jack | 1 |
B | 1P-1837 | Bearing Puller Adapter | 1 |
5P-4184 | Tool Stud | 1 | |
6V-3170 | Double Acting Cylinder | 1 | |
9U-6600 | Hand Hydraulic Pump | 1 | |
9U-6832 | Nut (1 1/4 inch - 12NF) | 1 |
Start By:
- Remove the steering links. Refer to Disassembly and Assembly, "Steering Link - Remove" for the correct procedure.
- Remove hose assembly (1) and fitting (3).
- Remove hose assembly (2) and fitting (4).
Show/hide table
Illustration 2 g00410601 - Use Tooling (A) to support the weight of center arm (8). The center arm weighs approximately
165 kg (364 lb) . - Support the weight of pin (7). The pin weighs approximately
11 kg (24 lb) . - Remove bolts (5) and lock (6).
- Remove pin (7).
Show/hide table
Illustration 3 g00410602 - Remove center arm (8).
- Remove shims (9).
Show/hide table
Illustration 4 g00410603 - Use Tooling (B) to remove bearing (10).
Show/hide table
Illustration 5 g00410604 - Use Tooling (B) to remove bearing (11).
Show/hide table
Illustration 1 | g00410599 |
- Use Tooling (B) to install bearing (11).
Show/hide table
Illustration 7 g00410603 - Use Tooling (B) to install bearing (10).
Show/hide table
Illustration 8 g00410602 - Install shims (9).
- Use Tooling (A) to support the weight of center arm (8). The center arm weighs approximately
165 kg (364 lb) . - Install center arm (8).
Show/hide table
Illustration 9 g00410601 Show/hide tableIllustration 10 g00410605 Note: When pin (7) is being installed, align the slot in the pin with the position of lock (6). The slot will be difficult to align after the pin is installed.
- Support the weight of pin (7). The pin weighs approximately
11 kg (24 lb) . - Install pin (7).
- Install lock (6) and bolts (5).
Show/hide table
Illustration 11 g00410599 - Install hose assembly (2) and fitting (4).
- Install hose assembly (1) and fitting (3).
Note: When bearings (10) and (11) are installed, lower the temperatures of the bearings to approximately
Show/hide table
Illustration 6 | g00410604 |
End By:
- Install the steering links. Refer to Disassembly and Assembly, "Steering Link - Install" for the correct procedure.
Caterpillar Information System:
65E, 75E, 85E and 95E Agricultural Tractors Radiator Pressure Cap - Clean/Replace
572R Pipelayer Mounting and Dismounting
3406E Generator Set Engines Fuel System - Prime
65E, 75E, 85E and 95E Agricultural Tractors Slotted Cast Drive Wheel Scrapers - Check
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Final Drive Planetary (Drum) Oil - Change
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Drum Cooling Oil - Change
3406E Generator Set Engines Fuel System Secondary Filter - Replace
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Fire Extinguisher - Inspect
65E, 75E, 85E and 95E Agricultural Tractors Slotted Cast Drive Wheel Scrapers - Adjust
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Cutting Edges (Leveling Blade) - Inspect/Replace
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Crankshaft Vibration Damper - Inspect
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Walk-Around Inspection
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Design
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Capacities (Refill)
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Service Brake Disc Wear - Check
3508B Engine for Caterpillar Built Machines Fuel Filter Differential Pressure Switch
793C Off-Highway Truck Machine Systems Tire and Rim (Front) - Remove and Install
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Fuses, Circuit Breakers and Relays - Replace/Reset
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Final Drive Planetary (Drum) Oil Sample - Obtain
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Drum Scrapers - Inspect/Adjust/Replace
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Engine Air Filter Secondary Element - Replace
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Sampling Interval and Location of Sampling Valve
65E, 75E, 85E and 95E Agricultural Tractors Engine Air Filter Primary Element - Replace
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Radiator Core - Clean