Parking Brake - Adjust
Adjust the parking brake so that the parking brake is applied when you raise the parking brake handle to the third click or to the fourth click. If you must raise the parking brake handle above the fourth click in order to apply the parking brake, adjust the parking brake. Use the following procedure in order to adjust the parking brake.
- Fully lower parking brake handle (1) .
Show/hide table
Illustration 1 | g00326143 |
- Raise parking brake handle (1) to the second notch.
- Loosen forward jam nut (4) on cable housing (3). Loosen jam nut (4) as far as possible.
Show/hide table
Illustration 2 | g00326144 |
- Pull cable housing (3) rearward until you feel a 89 N (20.0 lb) resistance.
- Hold cable housing (3) in position. Tighten jam nut (2) until jam nut (2) contacts bracket (5) .
- Tighten jam nut (4) and jam nut (2) against bracket (5) .
- Raise parking brake handle (1) in order to check for the correct adjustment. Repeat this procedure if the adjustment is not correct.
Show/hide table
Illustration 3 | g00326143 |
Caterpillar Information System:
322B, 322B L, 325B and 325B L Excavators Seat Belt - Replace
784B and 785B Off-Highway Truck Air System and Brakes Air/Hydraulic Cylinder (Brake)
793B Off-Highway Truck Fuses (EMS) - Replace
740 Articulated Truck, 768C, 769C, 769D, 772B, 773B, 773D, 773E, 773F, 776, 776B, 776C, 776D, 777, 777B, 777C, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C and 793D Off-Highway Trucks and 771C, 771D, 775B, 775 Troubleshooting Notes
793B Off-Highway Truck Frame - Clean/Inspect
740 Articulated Truck, 768C, 769C, 769D, 772B, 773B, 773D, 773E, 773F, 776, 776B, 776C, 776D, 777, 777B, 777C, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C and 793D Off-Highway Trucks and 771C, 771D, 775B, 775 Stationary Pressure - Test
793B Off-Highway Truck Engine Oil and Filter - Change
3306C Engines for Caterpillar Built Machines Housing (Front)
740 Articulated Truck, 768C, 769C, 769D, 772B, 773B, 773D, 773E, 773F, 776, 776B, 776C, 776D, 777, 777B, 777C, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C and 793D Off-Highway Trucks and 771C, 771D, 775B, 775 Towing
793B Off-Highway Truck Transmission Tank Oil Level - Check
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Relay Valve (Brake Air)
793B Off-Highway Truck Transmission Oil Filter - Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Track Gauge Spacing - Change
Instructions for Installing HH55/HH65 Harvester Heads on 320B Excavators{6320} Instructions for Installing HH55/HH65 Harvester Heads on 320B Excavators{6320}
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Metering Pump (Steering)
Electronic Modular Control Panel II (EMCP II) For MUI Engines Relay Driver Module
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Transmission from Output Transfer Gears - Separate
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train General Information - Machines Without Integrated Braking System
3306C Engines for Caterpillar Built Machines Valve Mechanism Cover
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Steering Valve and Mounting (AWS)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Transport Lock
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Lift Arm Group
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Automatic Retarder Control (ARC)
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Transmission to Output Transfer Gears - Connect