Transport Lock
Show/hide table
 | |
| Illustration 1 | g00332454 |
- While the boom (1) is raised, engage the hooks (2) .
- Move the boom down against the hooks.
- Loosen the bolts (7) and place the wedges (5) in order to achieve a clearance of 1 mm (0.0394 inches) to 2 mm (0.0787 inches) between the wedges (5) and the swing frame (6) .
- Loosen the bolts (8) and adjust the stop (9) in order to provide a 2 mm (0.0787 inches) to 3 mm (0.118 inches) clearance between the notch in the hook (2) and the pointer on the stop (9) .
- Tighten the two bolts (7) and the one bolt (6) to a torque of 55 ± 10 N·m (40 ± 7 lb ft).
- Raise the boom (1) and check the operation of the boom lock. The lock should release.
- While the boom is raised against the swing frame (6), hold the backhoe control lever in the RAISE position in order to compress the wedges. This will also eliminate any gaps.
- Torque the two bolts (7) to a torque of 55 ± 10 N·m (40 ± 7 lb ft).
- Adjust the cable (4) so that a maximum of 9 threads are engaged in the rod end (3) .
- Recheck the operation of the boom lock. If the boom lock does not release, repeat step 1 through step 9.
- When the adjustment is complete, tighten all of the nuts on the cable assembly to a torque of 20 ± 5 N·m (15 ± 4 lb ft).
Caterpillar Information System:
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Steering Valve and Mounting (AWS)
3306C Engines for Caterpillar Built Machines Valve Mechanism Cover
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train General Information - Machines Without Integrated Braking System
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Transmission from Output Transfer Gears - Separate
Electronic Modular Control Panel II (EMCP II) For MUI Engines Relay Driver Module
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Metering Pump (Steering)
Instructions for Installing HH55/HH65 Harvester Heads on 320B Excavators{6320} Instructions for Installing HH55/HH65 Harvester Heads on 320B Excavators{6320}
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Track Gauge Spacing - Change
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Parking Brake - Adjust
322B, 322B L, 325B and 325B L Excavators Seat Belt - Replace
784B and 785B Off-Highway Truck Air System and Brakes Air/Hydraulic Cylinder (Brake)
793B Off-Highway Truck Fuses (EMS) - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Lift Arm Group
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Automatic Retarder Control (ARC)
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Transmission to Output Transfer Gears - Connect
CP-563C and CS-563C Vibratory Compactors Safety Messages
784B and 785B Off-Highway Truck Air System and Brakes Air Dryer
793B Off-Highway Truck Hoist, Torque Converter and Brake Tank Breather - Replace
793B Off-Highway Truck Fuel System - Prime
784B and 785B Off-Highway Truck/Tractor Air System and Brakes Air Control Valve (Pulled Unit)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Bucket Positioner and Lift Kickout
784B and 785B Off-Highway Truck Air System and Brakes Air Control Valve (Pulled Unit)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Before Starting Engine
784B and 785B Off-Highway Truck Air System and Brakes Hydraulic Tank (Torque Converter, Pulled Unit, Brake, and Transmission)