Front Wheel Oil - Change
Note: The oil change interval for the front wheel can be determined with the S·O·S scheduled oil sampling program. The oil change interval is based on the condition of the oil. If the S·O·S scheduled oil sampling program is not used, the oil change should be performed at 500 service hours.
- Position the front wheel so that the drain plug is facing downward.
Show/hide table
 | |
| Illustration 1 | g00321624 |
- Remove the drain plug.
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates. |
- Allow the oil to drain into a suitable container.
- Clean the drain plug and install the drain plug.
- Remove the filler plug.
- Fill the oil compartment to the bottom of the filler plug opening. Refer to Operation and Maintenance Manual, "Lubricant Viscosities". Refer to Operation and Maintenance Manual, "Refill Capacities" .
- Clean the filler plug and install the filler plug. Use the same procedure for the other front wheel.
Caterpillar Information System:
793B Off-Highway Truck Frame and Body Support Pads - Clean/Inspect
740 Articulated Truck, 768C, 769C, 769D, 772B, 773B, 773D, 773E, 773F, 776, 776B, 776C, 776D, 777, 777B, 777C, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C and 793D Off-Highway Trucks and 771C, 771D, 775B, 775 Service Tools
793B Off-Highway Truck Frame and Body - Inspect
793B Off-Highway Truck Fan Drive Bearing and Belt Adjusting Pulley - Lubricate
793B Off-Highway Truck Engine Air Filter Service Indicator - Inspect
793B Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Transmission Oil Pump - Disassemble
793B Off-Highway Truck Drive Shaft Slip Joint - Lubricate
784B and 785B Off-Highway Truck Air System and Brakes Brake Hydraulic System
793B Off-Highway Truck Differential and Final Drive Oil - Change
784B and 785B Off-Highway Truck Air System and Brakes Brake Hydraulic System
3306B Industrial Engine Serial Number Plate
793B Off-Highway Truck Steering Linkage - Inspect
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Transmission Oil Pump - Assemble
789B Off-Highway Truck Hydraulic System General Information
793B Off-Highway Truck Cooling System Coolant Additive (DEAC) - Add
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Alternator and Fan Belts - Inspect/Adjust/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Control Valve (Stabilizer)
793B Off-Highway Truck Cooling System Coolant Extender (ELC) - Add
740 Articulated Truck, 768C, 769C, 769D, 772B, 773B, 773D, 773E, 773F, 776, 776B, 776C, 776D, 777, 777B, 777C, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C and 793D Off-Highway Trucks and 771C, 771D, 775B, 775 Troubleshooting Methods
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Air Conditioner Condenser - Clean
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Differential (Standard)
793B Off-Highway Truck Cooling System Level - Check
793B Off-Highway Truck Cooling System Relief Valve - Clean