Stopping the Machine
Park the machine on a level surface. Block the tracks securely if it is necessary to park on a grade.
- Move the propel control to the NEUTRAL position.
- Move all of the switches that are set to the AUTO position to the MANUAL position or the OFF position.
- Move the parking brake switch to the ON position.
- Lower the screed onto the travel locks. Lower the hopper wings.
- Move the travel speed control to the PAVE position.
Show/hide table
 |
If it is necessary to leave the hopper wings raised, secure the wings together with a chain attached securely to the eyes in the wings, to avoid possible personal injury. |
 |
- Move the engine speed control to the LOW IDLE position.
Caterpillar Information System:
AP-1050B and BG-245C Asphalt Pavers Stopping the Engine
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Setting the Paver Speed
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Bypass Switch (Transmission Lubrication Filter)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Secondary Steering System - Conventional Steering
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Shipping the Machine
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Tow Point Cylinders
AP500F Asphalt Paver Towing the Machine
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Track Tension - Check
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Transmission Hydraulic System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Tracks - Inspect
3054 Engine Engine Design
AP500F Asphalt Paver Starting Motor - Inspect
AP-1050B and BG-245C Asphalt Pavers Engine Starting with Air Inlet Heater
789C Off-Highway Truck/Tractor Differential and Bevel Gear
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Flow Control and Relief Valve (Rear Axle Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Relief Valve (Line)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Stopping the Engine if an Electrical Malfunction Occurs
793B Off-Highway Truck Engine Valve Lash and Bridge - Adjust
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Ventilation Blower Wheel - Inspect/Clean
3054 Engine General Information
793B Off-Highway Truck Air System and Brakes Screen (Torque Converter and Front Brake Cooling)
583R Pipelayer Differential and Final Drive Oil Sample - Obtain
789C Off-Highway Truck/Tractor Rear Axle Housing