Crankcase Guard - Remove and Install
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Place a suitable floor jack under front guard (2). The weight of the front guard is 35 kg (75 lb).
Show/hide table
Illustration 1 | g00291601 |
Typical Example |
- Remove bolts (1) that hold the front guard to the frame.
- Use the floor jack in order to remove front guard (2) .
- Place a suitable floor jack under rear guard (4). The weight of the rear guard is 40 kg (85 lb).
Show/hide table
Illustration 2 | g00291603 |
Typical Example |
- Remove bolts (3) that hold the rear guard to the frame.
- Remove rear guard (4) .
Installation Procedure
- Use a suitable floor jack in order to install rear guard (4). The weight of the rear guard is 40 kg (85 lb).
Show/hide table
Illustration 3 | g00291603 |
Typical Example |
- Install bolts (3) .
- Use a suitable floor jack to install front guard (2). The weight of the front guard is 35 kg (75 lb).
Show/hide table
Illustration 4 | g00291601 |
Typical Example |
- Install bolts (1) .
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
IT14G Integrated Toolcarrier Cooling System Coolant Extender (ELC) - Add
3126B Engine for Caterpillar Built Machines Crankshaft Seals
980G Wheel Loader Hydraulic System Hydraulic System Troubleshooting
IT14G Integrated Toolcarrier Engine Valve Lash - Check
793B Off-Highway Truck Air System and Brakes Air Starting Motor
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Visual Inspection
3126B Engine for Caterpillar Built Machines Engine Oil Filter Base
Installation Of The 1W-1168 Front Housing Plate Assembly On The 0R-4351 Cylinder Block , The 0R-4352 Cylinder Block , The 0R-4353 Cylinder Block , And The 0R-4354 Cylinder Block {1163} Installation Of The 1W-1168 Front Housing Plate Assembly On The 0R-4351 Cylinder Block , The 0R-4352 Cylinder Block , The 0R-4353 Cylinder Block , And The 0R-4354 Cylinder Block {1163}
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Power Train Guard (Transmission) - Remove and Install
416C, 426C, 428C, 436C and 438C Backhoe Loaders Engine Starting
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve (Oil Manifold) - Pilot Hydraulic System
3126B and 3126E Truck Engines Water Temperature Regulator
IT14G Integrated Toolcarrier Cooling System Coolant (ELC) - Change
IT14G Integrated Toolcarrier Warranty Information
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Relief Valve (Line)
789B Off-Highway Truck Air System and Brakes Diverter Valve (Hoist)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Steering System Front Wheel
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Pump Flow - Test
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Lift Kickout
966G Wheel Loader and 972G Wheel Loader Steering System Relay (Secondary Steering Motor)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System Brake Accumulator
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Drive Shaft (Front) - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System Parking Brake
3126B Engines Cooling System