Power Train Guard (Transmission) - Remove and Install
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Position a suitable floor jack under power train guard (2) .
Show/hide table
 | |
| Illustration 1 | g00296241 |
- Remove bolts (1) .
- Use the floor jack to carefully remove power train guard (2). The weight of the power train guard is 64 kg (141 lb).
Installation Procedure
- Use a suitable floor jack to carefully install power train guard (2). The weight of the power train guard is 64 kg (141 lb).
Show/hide table
| | |
| Illustration 2 | g00296241 |
- Install bolts (1) that hold power train guard (2) to the frame.
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
416C, 426C, 428C, 436C and 438C Backhoe Loaders Engine Starting
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve (Oil Manifold) - Pilot Hydraulic System
3126B and 3126E Truck Engines Water Temperature Regulator
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Feeder Auto/Manual Control
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Engine Start Switch
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Steering Frame Lock
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Service and Parking Brake (Rear)
3126B Engine for Caterpillar Built Machines Camshaft
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System Monitoring System (Braking Functions)
3126B Industrial Engine Engine Design
3126B Engine for Caterpillar Built Machines Water Temperature Regulator
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Service and Parking Brake (Front)
Installation Of The 1W-1168 Front Housing Plate Assembly On The 0R-4351 Cylinder Block , The 0R-4352 Cylinder Block , The 0R-4353 Cylinder Block , And The 0R-4354 Cylinder Block {1163} Installation Of The 1W-1168 Front Housing Plate Assembly On The 0R-4351 Cylinder Block , The 0R-4352 Cylinder Block , The 0R-4353 Cylinder Block , And The 0R-4354 Cylinder Block {1163}
3126B Engine for Caterpillar Built Machines Engine Oil Filter Base
824G Wheel Tractor, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Visual Inspection
793B Off-Highway Truck Air System and Brakes Air Starting Motor
IT14G Integrated Toolcarrier Engine Valve Lash - Check
980G Wheel Loader Hydraulic System Hydraulic System Troubleshooting
3126B Engine for Caterpillar Built Machines Crankshaft Seals
IT14G Integrated Toolcarrier Cooling System Coolant Extender (ELC) - Add
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Crankcase Guard - Remove and Install
IT14G Integrated Toolcarrier Cooling System Coolant (ELC) - Change
IT14G Integrated Toolcarrier Warranty Information
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Relief Valve (Line)