Tire and Rim (Front) - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-7610     | Base     | 1     |
8S-7650 | Cylinder     | 1     | |
8S-7615 | Pin     | 1     | |
4C-5809 | Hydraulic Pump     | 1     | |
B     | 8S-7615     | Pin     | 1     |
8S-7621 | Tube     | 1     | |
8S-7640 | Stand     | 1     |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Remove five bolts (1). Use two persons to remove fender (2). The weight of fender (2) is approximately 27 kg (60 lb).
Show/hide table
Illustration 1 | g00291096 |
- Use Tooling (A) to lift the machine. Support the machine with Tooling (B) .
Show/hide table
Illustration 2 | g00291097 |
- Use suitable lifting slings and a hoist to support the tire and the rim, as shown. Remove bolts (3). Remove the tire and the rim as a unit. The combined weight of the tire and of the rim is approximately 500 kg (1100 lb).
Show/hide table
Illustration 3 | g00291098 |
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-7610     | Base     | 1     |
8S-7650 | Cylinder     | 1     | |
8S-7615 | Pin     | 1     | |
4C-5809 | Hydraulic Pump     | 1     | |
B     | 8S-7615     | Pin     | 1     |
8S-7621 | Tube     | 1     | |
8S-7640 | Stand     | 1     |
- Use suitable lifting slings and a hoist to position the tire and the rim, as shown. The combined weight of the tire and of the rim is approximately 500 kg (1100 lb).
Show/hide table
Illustration 4 | g00291098 |
- Install bolts (3). The initial torque for bolts (3) is 570 ± 80 N·m (420 ± 60 lb ft). Then turn bolts (3) by an additional 60 ± 5 degrees.
- Use Tooling (A) to lift the machine. Remove Tooling (B) .
Show/hide table
Illustration 5 | g00291097 |
- Lower the machine. Remove Tooling (A) .
- Use two persons to install fender (2). The weight of fender (2) is approximately 27 kg (60 lb). Install five bolts (1) .
Show/hide table
Illustration 6 | g00291096 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Cooling System Water Temperature Regulator - Replace
IT14G Integrated Toolcarrier Seat Belt
Procedure To Install The AM/FM Cassette Radio And CD Player{7338} Procedure To Install The AM/FM Cassette Radio And CD Player{7338}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Engine Air Precleaner - Clean
789C Off-Highway Truck Air System and Brakes Oil Filter (Parking Brake Release)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Engine Air Filter Secondary Element - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Differential and Final Drive Oil Level - Check
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package After Stopping Engine
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Parallel Joints
789B Off-Highway Truck Air System and Brakes Electric Drive Pump (Parking and Secondary Brake Release)
784B and 785B Off-Highway Truck/Tractor Air System and Brakes Gear Pump (Torque Converter and Parking Brake Release)
784B and 785B Off-Highway Truck/Tractor Air System and Brakes Gear Pump (Torque Converter, Parking Brake Release, and Pulled Unit Brake Cooling)
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Cooling System Coolant Extender (ELC) - Add
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Engine Air Filter Service Indicator - Inspect
784B and 785B Off-Highway Truck/Tractor Air System and Brakes Hydraulic Tank (Torque Converter, Hoist, Brake and Transmission)
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Cooling System Coolant (ELC) - Change
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System Brake Control Valve (Service)
789B Off-Highway Truck Air System and Brakes Relief Valve (Rear Brake Oil Cooler)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Engine Hour Meter
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Slack Adjuster (Front)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Engine Oil Level - Check
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Tire and Rim (Rear) - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement Radiator and Fan - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement Hood Tilt Actuator - Remove