Torque Specifications Caterpillar


O-Ring Face Seal Fittings

Usage:

SR4BHV ADT



Ilustrasi 1g01848710

Fitting seal muka O-ring (ORFS, O-ring face seal)

(1 ) Konektor seal muka O-ring

(1A) Alur O-ring

(2 ) Seal o-ring

(3 ) Mur untuk seal muka O-ring

Tabel 1
Fitting ORFS Besi    
Ukuran Ulir
Inci    
Torsi    
9/16 - 18    
27 ± 4 N·m (239 ± 35 lb in)    
11/16 - 16    
45 ± 5 N·m (33 ± 4 lb ft)    
13/16 - 16    
65 ± 10 N·m (48 ± 7 lb ft)    
1 - 14    
110 ± 17 N·m (81 ± 13 lb ft)    
1 13/16 - 12    
140 ± 21 N·m (103 ± 15 lb ft)    
1 7/16 - 12    
220 ± 33 N·m (162 ± 24 lb ft)    
1 11/16 - 12    
300 ± 45 N·m (221 ± 33 lb ft)    
2 - 12    
350 ± 53 N·m (258 ± 39 lb ft)    

Catatan: Gunakan 50 persen nilai torsi dari Tabel 1 bila fitting atau material port tidak mengandung besi.

Caterpillar Information System:

Contour Series Seat Contour Seat Air Suspension with Air Compressor
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Air Inlet Heater Starting Aid
Torque Specifications Straight Thread O-Ring Fittings
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Rear)
3406E and 3456 Industrial Engines Rocker Shaft
572R Pipelayer Fire Prevention and Explosion Prevention
C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
793C Off-Highway Truck Power Train Lubrication Relief Valve (Transmission) Pressure - Test
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Engine and Machine Warm-Up
793C Off-Highway Truck Power Train Transmission Hydraulic Control (Pressure Pack) - Test and Adjust
35, 45 and 55 Agricultural Tractors Extension Housing
966G and 972G Wheel Loaders Engine and Machine Warm-Up
Torque Specifications Installation of Fittings
3406E Truck Engine Connecting Rod
784C, 785C and 785C HAA Off-Highway Truck/Tractors Steering System Pressure Switch (Steering Pump Oil)
Contour Series Seat Contour Seat Air Suspension with Air System
Contour Series Seat Contour Seat Controls
Contour Series Seat Contour Seat With Front Controls - Disassemble
Contour Series Seat Contour Seat With Front Controls - Assemble
Contour Series Seat Contour Seat With Lumbar Option and Side Controls - Disassemble
554 Forwarder and 574 Forwarder Engine Valve Lash - Check
554 Forwarder and 574 Forwarder Fuel Injection Timing - Check
Contour Series Seat Contour Seat With Lumbar Option and Side Controls - Assemble
561M Pipelayer Torque Converter
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.