Accelerator Control
Show/hide table
 | |
| Illustration 1 | g00104486 |
Accelerator Pedal - Push down the pedal in order to increase travel speed. Release the pedal in order to decrease travel speed. The accelerator pedal will return to the low idle setting.
Use the pedal to reduce engine rpm for directional shifts when you use the loader.
Show/hide table
 | |
| Illustration 2 | g00104487 |
Accelerator Lever - This lever controls the engine speed for backhoe operation.
Operate the machine in the green operating range on the tachometer.
Show/hide table
| High Idle - Move the lever to position (1) for a faster idle speed. |
Show/hide table
| Low Idle - Move the lever to position (2) for a lower idle speed. |
For roading or loader operation, keep the lever in the position (2). Use the accelerator pedal to change the engine speed.
Caterpillar Information System:
793B Off-Highway Truck Power Train Torque Converter and Transmission Pressure Chart
793B Off-Highway Truck Power Train Final Drive
793B Off-Highway Truck Power Train Speed Sensor (Rear Wheel)
IT38F Integrated Toolcarrier and 938F Wheel-Type Loader Secondary Steering System Testing and Adjusting
IT28G Integrated Toolcarrier and 928G Wheel Loader Transmission Case
793B Off-Highway Truck Power Train Rear Axle Housing
793B Off-Highway Truck Power Train Differential
IT38F Integrated Toolcarrier and 938F Wheel-Type Loader Secondary Steering System System Operation
793B Off-Highway Truck Power Train Differential and Bevel Gear
IT38F Integrated Toolcarrier and 938F Wheel-Type Loader Secondary Steering System Specification
IT28G Integrated Toolcarrier and 928G Wheel Loader Output Transfer Gears
322B, 322B L, 325B and 325B L Excavators Engine Start Switch
446B Backhoe Loader After Starting Engine
416C, 426C, 428C, 436C and 438C Backhoe Loaders Air Conditioner - Test - If Equipped
446B Backhoe Loader Air Conditioner Belt - Inspect/Adjust/Replace
446B Backhoe Loader Alert Indicators
446B Backhoe Loader Alternate Exit
446B Backhoe Loader Alternator and Fan Belts - Inspect/Adjust/Replace
3208 Marine Engine Additional Reference Material
446B Backhoe Loader Axle Oscillation Bearings - Lubricate
446B Backhoe Loader Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
446B Backhoe Loader Backhoe Foot Operated Auxiliary Control - If Equipped
446B Backhoe Loader Backhoe Foot Operated Extendible Stick Control
446B Backhoe Loader Backhoe Four Lever Control