966G and 972G Wheel Loaders Caterpillar


Ether Starting Aid - If Equipped

Usage:

972G 1EW


NOTICE

Excessive ether can cause piston and ring damage. Use ether for cold starting purposes only.


A starting aid may be required during cold weather operation. Ether will automatically be injected by the engine control module when the ambient conditions call for a starting aid.



Illustration 1g00454418

Starting Aid - If the engine will not start, more ether may be necessary. While you crank the engine, depress the ether starting aid switch in order to manually inject a premeasured amount of ether into the air intake. This switch will be disabled when the air inlet temperature and the engine speed reach a certain level.

Reference: For more information, refer to Operation and Maintenance Manual, "Engine Starting".

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.