1998/06/29 Caterpillar


New Lamp Rocker Switch Provides Higher Load Capability {1429,1435,7332}

Usage:


769C (01X) 773B (63W),
777C (4XJ),
783B (8YM),
785B (6HK),
787B (9TM),
789B (7EK),
793B (1HL),
793C (4AR) Off Highway Trucks;
776C (2TK),
784B (5RK) Tractors

Reference: Service Magazine; April 21, 1997; Page 8; "Overloading Lamp Switch May Cause Switch Failure".

Description of Change: A new rocker switch is now available for activating the head lamps and marker lamps on the listed off highway trucks and tractors. The new switch has four sets of switch contacts rated for a maximum lamp load of 10 amps per contact. This provides a higher electrical load capability than the previous switch.

Adaptable To: The new 137-9500 Rocker Switch replaces the former 6T-3989 Rocker Switch. The new switch is in production with 785B (6HK0899), 789B (7EK0681), and 793C (4AR0365), and is adaptable to first production of the machines listed above.

Caterpillar Information System:

1998/06/29 Correction To SENR1275 And SENR1276 Electrical Schematics {7490}
1998/06/29 Aluminum Spools Used in Transmission Hydraulic Controls {3030,3167}
1998/06/29 Extended Life Coolant Standard Factory Fill {1352}
1998/06/29 Improved Cover Assemblies And New Washers Reduce Lever Effort On 24H Motor Graders {7323}
1998/06/29 New Camshaft Gasket Used In Engine Front Housing Group {1150,1162,1166}
1998/06/29 New Fan Blast Deflector Reduces Crop Disturbance {1351,1360,1381}
1998/06/22 New Guideline For Product Information, SEBF8340, " Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)" Available {0374,1250}
1998/06/22 Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/06/22 More Frequent S·O·S Oil Analysis Improves Component Life Cycle Management {7577,7542,7576,7571,7574,7578,7575,7573}
1998/06/22 New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking In 3304 And 3306 Machine Engines {1104,1105}
1998/06/22 Improved Telehandler Electrical System Requires New Fuses {1609,1417}
1998/06/22 New Pinned Torque Converter Impeller Bearing {3101,3135}
1998/06/29 Improved Seal Material Used In Dry Brake Assembly {4256,4004}
1998/06/29 New Procedure Improves Quality Of Ride And Ease Of Service {5077,5081,7200}
1998/06/29 Improved Brake Lines And Routings {4257,4004,4008,7166}
1998/06/29 Correction To Service Manual, SENR5664-03, "Air Conditioning And Heating Systems With R-134a Refrigerant" {0374,1809,7320}
1998/06/29 Contour Series Seat Adjustment Procedure Available To Reduce Side To Side Motion {7324}
1998/06/29 Shimming Procedure Available For Contour Series Seats To Improve Stability {7324}
1998/06/29 Parts Manual Literature For Skogsjan Harvester Heads Available {0374,0375,7568}
1998/06/29 Re-Alignment Warning Tag On All 3500 Generator Sets Reminds Of Alignment Required At Installation {1021}
1998/06/29 New Basic Water Pump Groups Used In Engine Water Pump Groups {1361}
1998/06/29 Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear {1204}
1998/07/06 Supplement For Special Instruction, "Installation Of Circle Repair Segments"{6154,6152}
1998/07/06 New Counterweight Bolt Assembly Replaces Bolt And Washer{1231}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.