1998/03/02 Caterpillar

Use FT-2549 Receiver Sleeve For Removing Idler Shaft {3159}

Usage:

D250E (5TN),
D300E (7FN) Articulated Trucks

Features/Benefits

* Used to remove idler shaft while protecting gear case from possible damage.

* Used with 6V-3175 Cylinder, 5P-4184 Stud (1 1/4-12), 9U-6832 Nut, and 9U-6600 Hydraulic Hand Pump.

* This tool eliminates need to use "H" blocks .

* Pulling force reacts directly against gear for more reliable removal.

FT-2549 Receiver Sleeve made from 1018 Steel

(1) Tube

(2) Plate

(A) 33.34 mm (1.313 in) diameter hole

(B) 172 mm (6.8 in) diameter

(C) 25.4 mm (1.00 in) stock tolerance

(D) 165.4 mm (6.51 in) reference

(E) 140.0 ± 1.0 mm (5.50 ± .04 in)

(F) 152 mm (6.0 in) stock tolerance

(G) 4.77 mm (.188 in) stock tolerance

Reference: Service Manual Module; SENR8653; Disassembly and Assembly; D250E and D300E Articulated Trucks; Power Train.

Caterpillar Information System:

1998/03/02 Supplements List For Articulated Trucks {0374,0350}

1998/03/02 Caterpillar Monitoring System Logs Faults That Cannot Be Cleared {7490}

1998/03/02 Cable Assembly Used To Download TPMS May Cause Incomplete Information {7601,7451}

1998/03/02 Flat Floor Body On 793C Off-Highway Trucks May Not Raise If Improperly Loaded {7258,5102}

1998/03/02 Use 141-8790 Alignment Tool To Disassemble And Assemble Cast Rear Wheels {4201}

1998/03/02 Supplements List For Motor Graders {0374,0350}

1998/03/02 Use 137-3483 PTO Shaft Seal Installer To Maintain Correct Seal Depth When Assembling Retainer {0745,1165}

1998/02/23 New Hardened Washer Improves Seat Suspension Service Life{7324}

1998/02/23 Installation Of Rod Increases Service Life Of Rolling Hoses{6460}

1998/02/23 New Vane Pump Groups Reduce Leakage Between Adapter And Fan Pump{5055}

1998/02/23 New Spring Improves Service Life Of First Speed Clutch{3030,3155}

1998/02/23 Procedure To Disable Top Transmission Gears{3030,1400}

1998/03/02 More Robust Air Conditioning Accumulator Now Used {7322,7320}

1998/03/02 Step Design Improved For Increased Service Life {7254}

1998/03/02 Uploading VIMS Source And Configuration Software {7601}

1998/03/02 Revised Service Manual Module, SENR6794-01, Specifications, 938G Wheel Loader And IT38G Integrated Toolcarrier, Hydraulic System Is Available {0374}

1998/03/02 Solenoid Cartridge May Rattle When Shaken {3073}

1998/03/02 Relocation Of The Differential Lock Switch Prevents Unintended Switch Activation {1408,3254}

1998/03/02 Improved Internal Rust Preventative Measures In Parts Service Machine Engines {1000,1050,1300,1350}

1998/03/02 Use 140-9944 Terminal Kit To Repair Wiring Harness {1400,0700}

1998/03/02 Use 139-4166 CAT/ATA Universal Cable For Diagnostic Testing {1900,0781}

1998/03/09 Plug Added To Protect Upper Vertical Swing Link Bearing{4159,4151}

1998/03/09 Improved Cylinder Rod Extension Procedure{4197}

1998/03/09 Improved Fuel Shut-Off Valve Prevents Leakage{1279,1329}