Flat Floor Body On 793C Off-Highway Trucks May Not Raise If Improperly Loaded {7258,5102}
Usage:
793C (4AR) Off-Highway Trucks
The 109-6918 Hoist Relief Valve Group on 793C Off-Highway Trucks equipped with a flat floor body may not be capable of lifting improperly loaded payloads. Loading practices must be corrected. Recommended payload distribution is approximately 33% of total load to front axle and approximately 66% of total load to rear axle.
Show/hide table
| NOTICE |
|---|
Do not raise the 109-6918 Hoist Relief Valve Group pressure above the specified setting of 20 325 +689/-0 kPa (2950 +100/-0 psi).
|
Caterpillar Information System:
1998/03/02 Use 141-8790 Alignment Tool To Disassemble And Assemble Cast Rear Wheels {4201}
1998/03/02 Supplements List For Motor Graders {0374,0350}
1998/03/02 Use 137-3483 PTO Shaft Seal Installer To Maintain Correct Seal Depth When Assembling Retainer {0745,1165}
1998/02/23 New Hardened Washer Improves Seat Suspension Service Life{7324}
1998/02/23 Installation Of Rod Increases Service Life Of Rolling Hoses{6460}
1998/02/23 New Vane Pump Groups Reduce Leakage Between Adapter And Fan Pump{5055}
1998/02/23 New Spring Improves Service Life Of First Speed Clutch{3030,3155}
1998/02/23 Procedure To Disable Top Transmission Gears{3030,1400}
1998/02/23 Supplement On Accumulator Precharge And Service Pressure{5081}
1998/02/23 Corrections To Shiftpoint Specifications{3168}
1998/02/23 Supplement For Disassembly And Assembly Of Front, Center, And Rear Differentials{3258}
1998/02/23 Improved Stop/Tail/Turn Lamps Now Available{1432}
1998/03/02 Cable Assembly Used To Download TPMS May Cause Incomplete Information {7601,7451}
1998/03/02 Caterpillar Monitoring System Logs Faults That Cannot Be Cleared {7490}
1998/03/02 Supplements List For Articulated Trucks {0374,0350}
1998/03/02 Use FT-2549 Receiver Sleeve For Removing Idler Shaft {3159}
1998/03/02 More Robust Air Conditioning Accumulator Now Used {7322,7320}
1998/03/02 Step Design Improved For Increased Service Life {7254}
1998/03/02 Uploading VIMS Source And Configuration Software {7601}
1998/03/02 Revised Service Manual Module, SENR6794-01, Specifications, 938G Wheel Loader And IT38G Integrated Toolcarrier, Hydraulic System Is Available {0374}
1998/03/02 Solenoid Cartridge May Rattle When Shaken {3073}
1998/03/02 Relocation Of The Differential Lock Switch Prevents Unintended Switch Activation {1408,3254}
1998/03/02 Improved Internal Rust Preventative Measures In Parts Service Machine Engines {1000,1050,1300,1350}
1998/03/02 Use 140-9944 Terminal Kit To Repair Wiring Harness {1400,0700}