Usage:
776 (14H),
776B (67C) Tractors;
777 (84A),
777B (4YC),
777C (4XJ),
777D (3PR) Trucks;
834B (7BR, 92Z) Wheel Tractors;
836 (3RL, 7FR) Landfill Compactors
Reference: Service Magazine; May 20, 1996; Page 9; "New Assembly Procedure For Hoist Pump Groups With Double Shaft Seals And Weep Hole".
Service Magazine; October 14, 1996; Page 10; "New Seals Available In Seal Kit For Steering Pump Groups And Hoist Pump Groups To Improve Service Life".
Description of Change: The position for the shaft seals has changed and a new seal cavity plug replaces the former plug.
NOTICE |
---|
Only use seals for machine models and pump groups listed in this article.
|
NOTE: This change does not apply to machines having water glycol systems.
See reference article (May 20, 1996) above for the recommended procedure for the following changes.
-
- * Two 139-3213 Seals-Lip-Type (replacing two former 6V-1899 Seals-Lip-Type) are installed with spring loaded sides opposite each other.
- * The 008-3214 Ring-Retaining is installed between the 139-3213 Seals-Lip-Type.
- * Two 139-3213 Seals-Lip-Type (replacing two former 6V-1899 Seals-Lip-Type) are installed with spring loaded sides opposite each other.
NOTE: The opening of the retaining ring must be over the drain hole of the seal cavity.
NOTE: A new 139-3272 Seal Kit replaces former 9J-4729 and 105-3204 Seal Kits for 6E-2046 Pump Group.
-
- * A new porous 6E-2943 Plug (bronze) replaces the former 3G-7242 Plug (rubber) in the seal cavity drain hole (weep hole).
(A) 4T-4944 Pump Group. (B) 6E-2046 Pump Group. (1) New 6E-2943 Plug. (2) 008-3214 Ring-Retaining. (3) 139-3213 Seals-Lip-Type.
NOTE: The new bronze plug provides early detection of oil leaks if either shaft seal should leak. (The new bronze 6E-2943 Plug is included with the new 139-3272 Seal Kit for 6E-2046 Pump Group).
Adaptable To: This change is adaptable to 4T-4944 and 6E-2046 Pump Groups for all models above.