SEALED PIN AND BUSHING GROUPS FOR 375/315 HYDRAULIC EXCAVATORS Caterpillar

SEALED PIN AND BUSHING GROUPS FOR 375/315 HYDRAULIC EXCAVATORS

Pin and Bushing Groups are now available as parts service for the 375, 5080, 365, 350,345, 330, 325, 320S, 322, 320, 318, 317, 315 Hydraulic Excavators.  Each group contains pins, bushings, and seal washers to service one link assembly.  Typically the quantities of each component in the pin and bushing groups are based on the longest link assembly for the different models based on pitch size.  The groups are provided at a value price that is less than having to buy the individual components.  This will allow you to replace the pin and bushings after turn, and allow you to wear links to 100% or 120% to provide a better cost per hour to operate the machine.

Models and Pin & Bushing Group Part Numbers

*Contains master track pin for press fit link assemblies, Pin and Bushing Group can be used with slip fit link assemblies, but must order slip fit master pin separately. 

See Attachment I, for consist of the pin and bushing groups by model.

When performing Custom Track Service (CTS), refer to wear charts found in the CTS Handbook 14^th Edition (Media Number PEK9400-02).

TCRobertson

Undercarriage Marketing Division

Parts and Service Marketing

CV4111 ? (309) 675-7879

E-mail: Robertson_Thomas@CAT.com

375, 5080, 365B

                                                                                                10.25? (260.4mm) Pitch

350

                                                                                                9.00? (228.6mm) Pitch

345B

                                                                                                8.50? (215.9mm) Pitch