NEW TRACK SHOES AVAILABLE FOR 5230 (7LL) EXCAVATOR Caterpillar


NEW TRACK SHOES AVAILABLE FOR 5230 (7LL) EXCAVATOR

Usage:

 Information Release Memo

UC01-03 

 
  CAT?

Undercarriage  

 

February 2001    

NEW TRACK SHOES AVAILABLE FOR 5230 (7LL) EXCAVATOR

New track shoes are now available in parts for the 5230 (7LL) Excavator.  These new shoes have press-in bushings that can be replaced.  These bushings can be replaced when track pitch extension is experienced.  Restoring the track pitch allows the shoes to be used to their 120% wear limit on the rail surface, reducing premature replacement.

Serviceability:

New and old shoes can be used in the same link assembly. The recommended procedure for mixing the shoes is to bore the old shoe and add bushings.  Refer to the Special Instruction REHS0994 for the exact service procedure.

 

 

 



 

Part Number Information:

Refer to Attachment I for serviceable Part number for the various moving undercarriage components.

 

Custom Track Service

When Performing Custom Track Service (CTS), refer to IRM UC98-21 (PELM0843) for procedures and wear guidelines.

     
       


 

Robert E. Windell                                                         Tom C. Robertson

Undercarriage Marketing Division                                 Undercarriage Marketing Division

Parts and Service Marketing                                         Parts and Service Marketing

CV4111 - (309) 675-7875                                          CV4111 ? (309) 675-7879

 

 

Quantity

Former

Part Number

New

Part Number

Track Groups

 

 

 

Track Group (5 sections) ? 43? (1100mm) *

9

150-0392

150-0392

Track Group (5 sections) ? 51? (1300mm) *

9

150-0394

150-0394

Track Group (5 sections) ? 59? (1900mm) *

9

150-0396

150-0396

*    An additional 2 Shoes, 4 Pins, 4 Plates and 4 Retaining Rings must be ordered for a complete (47 section) track.

 

Track Link/Shoe (47 sections)

 

 

 

43? (1100mm) Rock/General Purpose

1

149-3410

185-9380

2

---

168-7576

Bushing (per shoe) **

4

---

168-7577

51? (1300mm) Rock/General Purpose

1

152-0650

185-9381

Bushing (per shoe) **

2

---

168-7576

Bushing (per shoe)  **

4

---

168-7577

59? (1500mm) Soft Underfoot

1

152-0655

185-9382

Bushing (per shoe)  **

2

---

168-7576

Bushing (per shoe)  **

4

---

168-7577

 

 

 

 

Other Components

 

 

 

Pin

94

110-3118

110-3118

Plate

94

110-3119

175-1229

Retaining Ring

94

107-1036

9T-2584

**  Component of preceding assembly or group.  Bushings can be ordered individually to repair a worn shoe or to retrofit into an old style shoe.

 

 
PELM0995

CATERPILLAR?

?2003 Caterpillar

Caterpillar Information System:

UNDERCARRIAGE RELATED IRM LISTING UNDERCARRIAGE RELATED IRM LISTING
CAT® REMAN ANNOUNCES THE RELEASE OF REMAN UPGRADE-TO-NEW (UTN) BARE BLOCKS FOR C175-16 AND C175-20 APPLICATIONS CAT® REMAN ANNOUNCES THE RELEASE OF REMAN UPGRADE-TO-NEW (UTN) BARE BLOCKS FOR C175-16 AND C175-20 APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART) CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART) CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES THE RELEASE OF A FUEL CHECK VALVE FOR GAS 3600 APPLICATIONS CAT REMAN ANNOUNCES THE RELEASE OF A FUEL CHECK VALVE FOR GAS 3600 APPLICATIONS
Reman Announces C18, C32 and 3500 Engine Options for Electric Power Applications Reman Announces C18, C32 and 3500 Engine Options for Electric Power Applications
Cat Reman Announces C7 Engine Option for Certain Thomas Built Bus Applications Cat Reman Announces C7 Engine Option for Certain Thomas Built Bus Applications
Cat Reman Announces Addition of Upgrade-To-New (UTN) and Reman Cylinder Heads for Cat® Non-Captive Engines Cat Reman Announces Addition of Upgrade-To-New (UTN) and Reman Cylinder Heads for Cat® Non-Captive Engines
Cat Reman Announces Additional Upgrade-To-New Crankshafts for Cat® Machine Applications Cat Reman Announces Additional Upgrade-To-New Crankshafts for Cat® Machine Applications
Cat Reman Announces Release of 3116 and 3126 Complete Engines for Cat® Marine Pleasure Craft Applications Cat Reman Announces Release of 3116 and 3126 Complete Engines for Cat® Marine Pleasure Craft Applications
CAT REMAN ANNOUNCES ADDITIONAL 3412, 3408, 3306, 3406, C7, 3196 AND C18 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX) CAT REMAN ANNOUNCES ADDITIONAL 3412, 3408, 3306, 3406, C7, 3196 AND C18 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)
CAT REMAN ANNOUNCES ADDITIONAL SHORT BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX) CAT REMAN ANNOUNCES ADDITIONAL SHORT BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)
GREASE LUBRICATED LINK ASSEMBLIES FOR HYDRAULIC EXCAVATORS GREASE LUBRICATED LINK ASSEMBLIES FOR HYDRAULIC EXCAVATORS
EXCAVATOR TRACK ROLLER IMPROVEMENTS EXCAVATOR TRACK ROLLER IMPROVEMENTS
NEW 5130B EXCAVATOR TRACK SHOES AND WEAR CHART NEW 5130B EXCAVATOR TRACK SHOES AND WEAR CHART
MADE TO ORDER (MTO) TRACK GROUP PROGRAM (NACD ONLY) MADE TO ORDER (MTO) TRACK GROUP PROGRAM (NACD ONLY)
UNDERCARRIAGE FOR NEW 5110B EXCAVATOR UNDERCARRIAGE FOR NEW 5110B EXCAVATOR
325B/330B EXCAVATOR GREASE LUBRICATED LINK ASSEMBLIES 325B/330B EXCAVATOR GREASE LUBRICATED LINK ASSEMBLIES
UNDERCARRIAGE RELATED IRM LISTING UNDERCARRIAGE RELATED IRM LISTING
789B and 789C Wheel Station Rebuilds 789B and 789C Wheel Station Rebuilds
CATERPILLAR® NEXUS UNDERCARRIAGE PARTS CATERPILLAR® NEXUS UNDERCARRIAGE PARTS
UNDERCARRIAGE FOR NEW 385B AND 5090B EXCAVATORS UNDERCARRIAGE FOR NEW 385B AND 5090B EXCAVATORS
HEAVY DUTY TRACK ROLLER IMPROVEMENTS FOR 320C, 322C AND 325C HEAVY DUTY TRACK ROLLER IMPROVEMENTS FOR 320C, 322C AND 325C
SEALED PIN AND BUSHING GROUPS FOR 375/315 HYDRAULIC EXCAVATORS SEALED PIN AND BUSHING GROUPS FOR 375/315 HYDRAULIC EXCAVATORS
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.