Usage:
1. Remove the three bolts (2) that hold override assembly (1) to fuel ratio control.
2. Remove the override assembly (1).
3. Disconnect line (3) from fuel ratio control.
4. Remove the two bolts that hold the fuel ratio control to governor. Move the fuel ratio control (4) toward front of engine and remove it from governor.
Install Fuel Ratio Control With Override
1. Install the fuel ratio control on the governor. Make sure the bolt (1) engages the groove (slot) in rack stop collar (2). Install the two bolts that hold fuel ratio control in place.
2. Connect line (3) for air to the fuel ratio control.
3. Install the override assembly and bolts that hold it in place.
4. Make an adjustment to the fuel ratio control. See FUEL RATIO CONTROL SETTING IN TESTING AND ADJUSTING.
Disassemble Fuel Ratio Control With Override
start by:
a) remove fuel ratio control with override
1. Remove the cover (1), spring (2), and plunger (3) from override housing (4).
2. Remove the nut and screw that hold lever assembly to the override housing (4). Remove the lever assembly and spring. Remove the seal from the housing.
3. Remove the cover (5) from the housing. Remove the two springs. Turn bolt (6) and remove the washer, diaphragm, retainer and bolt.
Assemble Fuel Ratio Control With Override
1. Connect the bolt to the washer, diaphragm and retainer. Put the diaphragm assembly and the two springs in housing. Install the cover for fuel ratio control.
2. Install the seal in override housing with lip of seal toward arm. Install the lever and spring. Install the nut and screw that hold the lever.
3. Install the plunger, spring and cover on the override housing.
end by:
a) install fuel ratio control with override