Fuel Priming Pump
Usage:
Remove & Install Fuel Priming Pump
1. Turn off the fuel supply to the fuel priming pump.
2. Remove the bolts that hold shield (1) to support assembly (2). Remove the shield.
3. Remove the two bolts, fuel priming pump (3) and the gasket from the adapter.
NOTE: The following steps are for installation of the fuel priming pump.
4. Put the gasket and fuel priming pump (3) in position on the adapter, and install the two bolts that hold them in place.
5. Put shield (1) in position on the support assembly, and install the bolts that hold it.
6. Turn on the fuel supply to the fuel priming pump.
Caterpillar Information System:
3512 AND 3516 EUI ENGINES Water Pump
3512 AND 3516 EUI ENGINES Auxiliary Water Pump
3512 AND 3516 EUI ENGINES Crankcase Breathers
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Crankshaft
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Crankshaft Main Bearings
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Connecting Rod Bearings
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Camshaft Bearings
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Camshaft
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Timing Gears & Plate
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Timing Gear Cover
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Cylinder Liners
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES Pistons & Connecting Rod Assemblies
3512 AND 3516 EUI ENGINES Fuel Filter Base
3512 AND 3516 EUI ENGINES Fuel Transfer Pump
3512 AND 3516 EUI ENGINES Oil Pump
3512 AND 3516 EUI ENGINES Oil Filter Base
3512 AND 3516 EUI ENGINES Oil Pan
3512 AND 3516 EUI ENGINES Oil Scavenge Pump
3512 AND 3516 EUI ENGINES Accessory Drive (Front)
3512 AND 3516 EUI ENGINES Flywheel
3512 AND 3516 EUI ENGINES Oil Sequence Valves
3512 AND 3516 EUI ENGINES Oil Cooler
3512 AND 3516 EUI ENGINES Exhaust Manifolds
3512 AND 3516 EUI ENGINES Aftercooler