768C & 769C TRACTOR & 769C TRUCK VEHICLE SYSTEMS Caterpillar

Show/hide table

To prevent possible personal injury, do not remove any hoses from the wet tank until all air pressure has been removed.

NOTE: The wet tank and reservoir is located behind the left front suspension cylinder on the outside of frame.

1. Put identification marks on hoses (1), (2) and (4), and disconnect them from wet tank (5).

2. Remove four bolts (3) that fasten the wet tank to the frame, and remove the tank.

3. To install, put wet tank (5) in position, and install four bolts (3) that fasten the tank to frame. Connect hoses (1), (2) and (4) to the wet tank.