1999/01/01 Caterpillar

Use 146-2726 Maintenance Tool Group To Perform Routine Maintenance{1000,1000,0701}

Usage:

G3606 (3XF),
G3608 (4WF),
G3612 (1YG),
G3616 (4CG) Engines

Warranty: G

Features/Benefits

* Used to perform routine maintenance tasks on G3600 Engines

146-2726 Maintenance Tool Group

(1) 6V-9124 Screwdriver - used for terminal strips.

(2) 146-2739 Adapter, Cylinder Pressure - connects outside air pressure source to cylinders on 3500 and 3600 Engines during cylinder leak down testing.

(3) 9U-7330 Multimeter - test and adjust electrical circuits.

(4) 148-2997 Tool Kit, Valve Recession - measures valve seat recession by placing magnetic block on top of valve rotator with rod extending to top of cylinder head (used with 6V-3075 Dial Indicator on 3600 gas and diesel engines).

(5) 138-7573 Bracket, Link - turbo lift bracket.

(6) 146-2742 Tool, GAV Lash - set gas admission valve (GAV) lash by installing in valve cover base rear bolt hole and adjusting 5P-2056 Indicator Tip on gas admission rocker arm flat (use with 147-5536 Indicator Contact Point and 6V-3075 Indicator on gas admission rocker arms with pin).

(7) 143-8995 Tool, Leak Down - tests check valves in prechamber.

(8) 9U-6644 Support - turbo support.

(9) 4C-6593 Adjusting Tool - check and adjust valve lash.

(10) 146-2728 Pickup Tool, Flex - remove check valve seal.

(11) 1P-0529 Handle - waste gate tool.

(12) 9U-6248 Bolt, Guide - install equally spaced bolts in outer ring of holes in back of turbocharger compressor housing during assembly.

(13) 9U-7516 Gauge, Spark Plug - check spark plug gap.

(14) 9U-7511 Seat Cleaner - spark plug seat cleaner.

(15) 1P-0462 Plate, Drive - waste gate tool.

(16) 6L-5897 Bolt - waste gate tool.

(17) 143-8997 Valve, Check - checks leak down fixture (143-8995) before testing check valves.

(18) 4C-4601 Socket, Spark Plug - remove and install spark plugs.

(19) 9S-5031 Socket - removes combustion sensor spark plug.

(20) Carrying Case.

Not Shown:

* 1U-8860 Pickup Group, Blowby - check blow by volume;

* 8T-2700 Indicator Group - measures volume of blowby gas coming from crankcase breather and air velocity through radiator;

Caterpillar Information System:

1999/01/01 New Special Instruction Details The Flushing And Pickling Process Of Engine Piping{0374}

1999/01/01 New Terminal Assembly, Spacer, And Extension Used In Transformer Group{1561}

1999/01/01 Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}

1999/01/01 Use 125-0201 Guide Assembly For Camshaft Installation {1202}

1999/01/01 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}

1999/01/01 New High Pressure Oil Hose Assembly Now Used{1307}

1999/01/01 Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads{1100,0703}

1999/01/01 New Gasket Used In Air Lines Group{1071}

1999/01/01 Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}

1999/01/01 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}

1998/12/01 New Maintenance Information For Generators{4450}

1998/12/01 New Metal Particle Detector And New Metal Particle Detector Kit Available{7430}

1999/01/01 New Thermowells Available{1050,1059,7498}

1999/01/01 Dry Cleaning Of G3600 Turbochargers{1052}

1999/01/01 Use 155-3046 10 mm Hex Socket to Remove and Install TPS 57D Turbocharger Band Clamps{1056}

1999/01/01 Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}

1999/01/01 New Cylinder Head Group And New Cylinder Head Assembly Help Prevent Early Hour Valve Guttering In Heavy Fuel Oil (HFO) Applications{1103,1105}

1999/01/01 Installation Procedure For Exhaust Valve Rotator{1109}

1999/01/01 Use 145-0316 Cleaning Kit For Gas Engine 2-Stage After Coolers{1350}

1999/01/01 New Cable Tray Mounting Group Is Used In Conjunction With Treated Water Aftercooler Group{1408}

1999/01/01 New Combustion Sensor Groups{1555}

1999/01/01 Procedures For Checking And Charging Hydrax Accumulator{1716}

1999/01/01 New Status Control Module (SCM) Provides Increased Engine Protection{7451}

1999/01/01 Corrections To Special Instruction, REHS0181, Instructions For Mounting The Electronic Modular Control Panel II In A Remote Location{4490,7451}