Drum Support Installation
Usage:
A. Drum Support Installation - Vibratory Side
1. Check the condition of the rubber shock mounts. Replace any that show signs of severe cracking, fatigue or breakage.
2. Install shock mounts to the vibra arms.
3. Install the vibra arms and shock mounts to the roller bearing housing. Torque the four nuts to 476 N-m (350 ft.-lb.).
4. Install the two shock mount spacers to the shock mounts.
Caterpillar Information System:
VIBRATORY DRUM Drum Reassembly
VIBRATORY DRUM Drum Disassembly
VIBRATORY DRUM Drum Support And Drum Drive Removal
VIBRATORY DRUM Drum Removal
VIBRATORY DRUM Components
VIBRATORY DRUM Introduction
TECHNICAL INFORMATION Specifications
TECHNICAL INFORMATION Hydraulic Schematic
TECHNICAL INFORMATION Wiring Diagram
TECHNICAL INFORMATION Pressure Settings
DRUM REMOVAL Bearing Tests And Wear Limits
DRUM REMOVAL Service Information
VIBRATORY DRUM Drum Replacement
VIBRATORY DRUM Bearing Wear Tests
VIBRATORY DRUM Drum Cut-Away
AP-200 ASPHALT PAVER PROPEL SYSTEM HYDRAULICS Systems Operation
AP-200 ASPHALT PAVER PROPEL SYSTEM HYDRAULICS Testing And Adjusting
AP-200 ASPHALT PAVER EIGHT-BANK VALVE HYDRAULIC SYSTEMS Systems Operation
AP-200 ASPHALT PAVER EIGHT-BANK VALVE HYDRAULIC SYSTEMS Testing And Adjusting
AP-200 ASPHALT PAVER TECHNICAL INFORMATION Minor Adjustments
AP-200 ASPHALT PAVER TECHNICAL INFORMATION Pressure Settings
AP-200 ASPHALT PAVER TECHNICAL INFORMATION Wiring Diagram
AP-200 ASPHALT PAVER TECHNICAL INFORMATION Hydraulic Schematics
F2L 511D ENGINE Foreword