1987/04/01 Caterpillar


New Service Tools Available

Usage:


The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.

Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction Form Number is shown in the last column of the chart along with the Tool Announcement form number.

See your Caterpillar dealer for additional information about these tools or for drawings of the Fabricated Tools.

Caterpillar Information System:

1987/03/01 Water Separator Available
1987/03/01 Check For Plugged Orifices In Mechanical Pressure Gauges
1987/03/01 New Voltage Regulators Used On SR-4 Generators
1987/03/01 Tools Available To Install Plastic Tie Straps
1987/03/01 Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01 Cylinder Head Water Directors No Longer Needed In Direct Injection Engines
1987/03/01 New 8T5261 Bushing Installer And Remover Adapter Tool Available
1987/03/01 Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01 Water Temperature Regulators Standardized
1987/03/01 Two Front Timing Gear Housings Available
1987/03/01 Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01 New Fan Drives Used
1987/04/01 Gasket Removed From Flywheel Housing Cover Groups
1987/04/01 New Clamps And Grommets For Turbocharger Oil Lines
1987/04/01 Checking Injector Synchronization On Engines Equipped With New 11.0 mm Injectors
1987/04/01 New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01 New Washer Used In Fuel Transfer Pump Group
1987/04/01 Longer Bolts With Spacers Now Used On Exhaust Manifolds
1987/04/01 Identification Of External Terminals On Alternators
1987/04/01 Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit
1987/04/01 Pleasure Craft Cruise Kits Available
1987/04/01 Oversize Bearings For Turbocharger Center Housings Available
1987/04/01 5P957 And 5P3514 Coolant And Battery Tester
1987/04/01 Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.