Mini Hydraulic Excavator Monitoring System Caterpillar


Service Password Entry

Usage:

308 GG8


Illustration 1g06334877

To access the Service Mode Menu options, press the "Menu" button, select "Service", then "Service Mode".



Illustration 2g06353456

Enter the four-digit service entry passcode.

Note: Factory set default code is 1234.

Once the passcode has been entered, the Service menu option will be active until machine is powered down (key OFF). On the next start (key ON), the passcode must be reentered to enable the Service menu options again.



Illustration 3g06334881

The following options are available in the "Service Mode" menu:

  • Machine

  • Security

Caterpillar Information System:

Mini Hydraulic Excavator Monitoring System Warning Operation
C27 and C32 Generator Set Product Installation
C27 and C32 Generator Set Product Lifting
336 Excavator Machine Systems Counterweight - Remove and Install
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Diesel Exhaust Fluid Module - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pump
336, 336 GC and 340 Excavator Systems Accumulator (Pilot)
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper
Mini Hydraulic Excavator Monitoring System Prestart Monitoring Function
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Diesel Exhaust Fluid Filter - Remove and Install
Mini Hydraulic Excavator Monitoring System General Information
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800} Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Mini Hydraulic Excavator Monitoring System System Schematic
320 GC, 320 and 323 Excavator Machine Systems Specifications Front Lines
320 GC, 320 and 323 Excavator Machine Systems Specifications Seat Belt
320 GC, 320 and 323 Excavator Machine Systems Specifications Drain Line
336 and 336 GC Excavator Lifting Capacities
3500C IMO III Engines Event Codes
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Coolant Level Is Low
G3500H Generator Set Engine Lubrication System
3500C IMO III Engines SCR Catalyst Inlet Pressure Is Low
336 Excavator Machine Systems Swing Gear and Bearing - Remove
336 and 336 GC Excavator Fuel System Water Separator - Drain
336 Excavator Machine Systems Swing Gear and Bearing - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.