Engine Oil Pump
Show/hide table
| |
| Illustration 1 | g06281270 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| Before you install the pump, lubricate the moving parts with clean engine oil. Rotate the pump by hand in order to ensure that the pump rotates freely. | |||
| 1 | 1 | 2S-2760 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
|||
| 2 | 1 | 516-6890 Drive | Diameter of the new shaft is |
| Distance from the end of the shaft to the gear face is |
|||
| 3 | 1 | 516-6891 Shaft Idler | Diameter of the new shaft is |
| Distance from the end of the shaft to the gear face is |
|||
Show/hide table
| |
| Illustration 2 | g06281275 |
|
116-1979 Oil Pump Body As | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 4 | 2 | 7N-2156 Bushing | Installation depth (D) is |
| Position (B) of bushing joints from the centerline through the bearing bores is 30 ± 15 degrees. | |||
| 5 | 2 | 8M-8489 Dowel | Protrusion (E) is |
Show/hide table
| |
| Illustration 3 | g06281284 |
|
127-6356 Pump Cover | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 6 | 2 | 8S-6511 Bushing | Install the bushing flush with face (7). |
| Position (F) of bushing joints from the centerline through the bearing bores is 30 ± 15 degrees. |
Caterpillar Information System:
336, 336 GC and 340 Excavator Systems Accumulator (Pilot)
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper
Mini Hydraulic Excavator Monitoring System Prestart Monitoring Function
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Diesel Exhaust Fluid Filter - Remove and Install
Mini Hydraulic Excavator Monitoring System General Information
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800} Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
SCR Retrofit Aftertreatment Kit Pressure Sensor (Exhaust Inlet) - Remove and Install
SCR Retrofit Aftertreatment Kit Temperature Sensor (Exhaust Outlet) - Remove and Install
SCR Retrofit Aftertreatment Kit Temperature Sensor (Exhaust Inlet) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Mounting and Dismounting
SCR Retrofit Aftertreatment Kit DEF Injector and Mounting - Remove and Install
C7.1 Marine Propulsion Engine Crankshaft - Install
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Diesel Exhaust Fluid Module - Remove and Install
336 Excavator Machine Systems Counterweight - Remove and Install
C27 and C32 Generator Set Product Lifting
C27 and C32 Generator Set Product Installation
Mini Hydraulic Excavator Monitoring System Warning Operation
Mini Hydraulic Excavator Monitoring System Service Password Entry
Mini Hydraulic Excavator Monitoring System System Schematic
320 GC, 320 and 323 Excavator Machine Systems Specifications Front Lines
320 GC, 320 and 323 Excavator Machine Systems Specifications Seat Belt
320 GC, 320 and 323 Excavator Machine Systems Specifications Drain Line
336 and 336 GC Excavator Lifting Capacities
3500C IMO III Engines Event Codes