Rocker Arm - Assemble
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
 |
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Ensure that all components are clean and free from wear and damage. Refer to Specifications, "Rocker Shaft" for more information. If necessary, replace any components that are worn or damaged.
Show/hide table
| |
| Illustration 1 | g06273239 |
Show/hide table
| |
| Illustration 2 | g06273240 |
Show/hide table
| |
| Illustration 3 | g06273241 |
|
Lubricate the bores of rocker arm assemblies and the rocker shaft with clean engine oil. | |
Note: The rocker arm assembly for the inlet valve is longer than the rocker arm assembly for the exhaust valve. Used components should be installed in the original location.
Show/hide table
| |
| Illustration 4 | g06273242 |
Show/hide table
| |
| Illustration 5 | g06273243 |
End By:
- Install the rocker arm and shaft.
Caterpillar Information System:
C7.1 Marine Propulsion Engine Rocker Arm - Disassemble
C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Remove
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Oil Pan - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuses - Replace
C27 and C32 Generator Set Model View Illustrations
C27 and C32 Generator Set Control Panel - Inspect/Test
C27 and C32 Generator Set Starting the Engine
C27 and C32 Generator Set Cold Weather Starting
C27 and C32 Generator Set Configuration Parameters
C27 and C32 Generator Set Product Description
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel Tank Water and Sediment - Drain
C27 and C32 Generator Set Maintenance Interval Schedule - Prime
C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
336, 336 GC and 340 Excavator Systems Diagnostic Trouble Codes
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057} The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Jacket Water Heater May Fail on Certain 3512C HD and 3516C HD Marine Engines {1383} The Jacket Water Heater May Fail on Certain 3512C HD and 3516C HD Marine Engines {1383}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil - Change
336 Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil Filter (Return) - Replace
Reman 3400 HEUI Injectors May Be Mislabeled {1290} Reman 3400 HEUI Injectors May Be Mislabeled {1290}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil Level - Check
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Radiator Core - Clean