Oil Pan - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| |
| Illustration 1 | g06271812 |
|
Drain the engine. Refer to Operation and Maintenance Manual, "Engine Oil - Change". Refer to Operation and Maintenance Manual, "Engine Oil - Check" for the correct draining procedure. | |
Show/hide table
| |
| Illustration 2 | g06273305 |
Show/hide table
| |
| Illustration 3 | g06273262 |
Show/hide table
| |
| Illustration 4 | g06273264 |
Show/hide table
| |
| Illustration 5 | g06273266 |
Show/hide table
| |
| Illustration 6 | g06273267 |
Show/hide table
| |
| Illustration 7 | g06273268 |
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 230-6262 | Sealant | - |
- Install the oil pan in the reverse order of removal.
Show/hide table
| |
| Illustration 8 | g06273269 |
|
Apply Tooling (A) to a bead of Apply Tooling (A) to a bead of | |
Caterpillar Information System:
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuses - Replace
C27 and C32 Generator Set Model View Illustrations
C27 and C32 Generator Set Control Panel - Inspect/Test
C27 and C32 Generator Set Starting the Engine
C27 and C32 Generator Set Cold Weather Starting
C27 and C32 Generator Set Configuration Parameters
C27 and C32 Generator Set Product Description
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel Tank Water and Sediment - Drain
C27 and C32 Generator Set Maintenance Interval Schedule - Prime
C27 and C32 Generator Set Maintenance Interval Schedule - Standby
794 AC Off-Highway Truck Leaving the Machine
C11 and C13 Industrial Engines Maintenance Interval Schedule - Engines Which Have Shallow Oil Pans
C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Remove
C7.1 Marine Propulsion Engine Rocker Arm - Disassemble
C7.1 Marine Propulsion Engine Rocker Arm - Assemble
C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
336, 336 GC and 340 Excavator Systems Diagnostic Trouble Codes
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057} The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Jacket Water Heater May Fail on Certain 3512C HD and 3516C HD Marine Engines {1383} The Jacket Water Heater May Fail on Certain 3512C HD and 3516C HD Marine Engines {1383}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil - Change
336 Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil Filter (Return) - Replace
Reman 3400 HEUI Injectors May Be Mislabeled {1290} Reman 3400 HEUI Injectors May Be Mislabeled {1290}