Rocker Arm - Disassemble
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Start By:
- Remove the rocker arm and shaft.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Make an identification mark on each rocker arm assembly to show the location.
Note: The components must be reinstalled in the original location. Do not interchange components.
Show/hide table
Illustration 1 | g06273234 |
Note: The rocker arm assembly for the inlet valve is longer than the rocker arm assembly for the exhaust valve.
Show/hide table
Illustration 2 | g06273235 |
Show/hide table
Illustration 3 | g06273236 |
Show/hide table
Illustration 4 | g06273237 |
Show/hide table
Illustration 5 | g06273238 |
Caterpillar Information System:
C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Remove
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Oil Pan - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuses - Replace
C27 and C32 Generator Set Model View Illustrations
C27 and C32 Generator Set Control Panel - Inspect/Test
C27 and C32 Generator Set Starting the Engine
C27 and C32 Generator Set Cold Weather Starting
C27 and C32 Generator Set Configuration Parameters
C27 and C32 Generator Set Product Description
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel Tank Water and Sediment - Drain
C27 and C32 Generator Set Maintenance Interval Schedule - Prime
C27 and C32 Generator Set Maintenance Interval Schedule - Standby
C7.1 Marine Propulsion Engine Rocker Arm - Assemble
C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
336, 336 GC and 340 Excavator Systems Diagnostic Trouble Codes
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057} The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Jacket Water Heater May Fail on Certain 3512C HD and 3516C HD Marine Engines {1383} The Jacket Water Heater May Fail on Certain 3512C HD and 3516C HD Marine Engines {1383}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil - Change
336 Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil Filter (Return) - Replace
Reman 3400 HEUI Injectors May Be Mislabeled {1290} Reman 3400 HEUI Injectors May Be Mislabeled {1290}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil Level - Check
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain