Heat Exchanger - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
- Turn the sea water feed to the off position.
Show/hide table
| |
| Illustration 1 | g06257071 |
Show/hide table
| |
| Illustration 2 | g06257076 |
Show/hide table
| |
| Illustration 3 | g06257080 |
Show/hide table
| |
| Illustration 4 | g06257082 |
Show/hide table
| |
| Illustration 5 | g06257086 |
Show/hide table
| |
| Illustration 6 | g06257090 |
Show/hide table
| |
| Illustration 7 | g06257093 |
- Install the heat exchanger in the reverse order of removal.
Show/hide table
| |
| Illustration 8 | g06257097 |
Show/hide table
| |
| Illustration 9 | g06257099 |
Caterpillar Information System:
336 Excavator Machine Systems Swivel - Assemble
336 Excavator Machine Systems Swivel - Disassemble
336 Excavator Machine Systems Swivel - Remove and Install
797F Off-Highway Truck Fuel System Secondary Filter - Replace
336 Excavator Machine Systems Heating and Air Conditioning Unit - Assemble
336 Excavator Machine Systems Heating and Air Conditioning Unit - Disassemble
320 GC, 320 and 323 Excavator Machine Systems Specifications Travel Motor
336 Excavator Machine Systems Heating and Air Conditioning Unit - Remove and Install
336 Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
336 Excavator Machine Systems Seat - Remove and Install
Large Mining Truck Payload Monitor Settings Adjustments {7494} Large Mining Truck Payload Monitor Settings Adjustments {7494}
797F Off-Highway Truck Engine Water Pump - Inspect
336 Excavator Machine Systems Main Control Valve - Disassemble
336 Excavator Machine Systems Main Control Valve - Assemble
336 Excavator Machine Systems Main Control Valve - Remove and Install
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960} Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
G3516 Petroleum Engines Turbocharger - Remove
336, 336 GC and 340 Excavator Systems Travel on Level Ground - Test - Optional Test
336, 336 GC and 340 Excavator Systems Engine Performance - Test - Engine Speed
G3516 TA Engine Catalytic Converter Has High Inlet Temperature
Regulatory Compliance Information Product Link - PLE702 - If Equipped
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump Air - Purge
336, 336 GC and 340 Excavator Systems Hydraulic System Air - Purge - Medium Pressure Circuit
336, 336 GC and 340 Excavator Systems Automatic Travel Speed Control - Test