C9.3B Engines Caterpillar


ARD Fuel System - Test

Usage:

D6 B72

  • Connect the Cat® Electronic Technician (ET) to the service tool connector.

  • Start the engine.

  • Activate the "ARD Ignition Test". The test runs for approximately 5 minutes.


    Illustration 1g02141616


    Illustration 2g02141618


    Illustration 3g02141619

  • While the ARD ignition test is active, inspect the fuel line and the coolant line connections at the following locations:

    • Inspect the fuel line connections at the ARD head for leaks

    • Inspect the fuel line connections at the ARD fuel manifold for leaks

    • Inspect the coolant line connections at the ARD head for leaks
  • Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.