320GC, 320 and 323 Excavators Machine Systems Caterpillar


Cab - Remove and Install

Usage:

320 GC BR4

拆卸步骤

参考: 专门说明书, "目视维修步骤 - 颜色和符号" , M0066576。

表 1
所需工具 
工具  零件号  零件描述  数量 
422-5474  吊环螺栓组件 


图 1g06234279


图 2g06234308
拆下空气滤清器和安装件。 参考拆解和组装, "机器系统", 空气滤清器 - 拆卸和安装,了解拆卸和安装步骤。


图 3g06234313


图 4g06234320


图 5g06234325


图 6g06234326


图 7g06234327


图 8g06234335


图 9g06234337


图 10g06234339


图 11g06234426


图 12g06234429


图 13g06234432


图 14g06234434


图 15g06234435


图 16g06234438


图 17g06234508


图 18g06234511


图 19g06234520


图 20g06234526


图 21g06234529


图 22g06234530


图 23g06234532


图 24g06234536


图 25g06234537


图 26g06234541

安装步骤

  1. 按与拆卸相反的顺序安装驾驶室。

表 2
扭矩表 
拧紧顺序  零件  步骤  分步  扭矩 
螺栓  24  425 ± 50 N·m (313.5 ± 36.9 lb ft) 
壳体  请勿超过 20 N·m (177.0 lb in) 

Caterpillar Information System:

PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope CAN Data Link - Test
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Event Codes
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Diagnostic Trouble Codes
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Determining Diagnostic Trouble Codes
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Diagnostic Capabilities
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope General Information
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Module - Flash Program
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Pop-Up Messages
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Service Test Menu
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Machine Settings Menu
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Menu Navigation
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Left Hand Buttons
CX38-P892 Well Servicing Transmission Torque Converter
XQP1100 Generator Set Circuit Breakers - Reset
C32 Marine Engines Water Temperature Regulator - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Pump Drive Coupling - Remove and Install
C7 Marine Engine Overhaul (Major)
3512E Tier 4 Final Engines for Land Electric Drilling Crankcase Breather - Valve Cover Integrated Breathers with Closed Crankcase Ventilation
XQP1100 Generator Set Fuel System - Prime
XQP1100 Generator Set Engine Oil and Filter - Change
C32 Marine Engines Expansion Tank - Remove and Install
320GC Excavator Engine Supplement Refrigerant Compressor - Remove and Install
320, 323 Excavator Engine Supplement Valve Mechanism Cover - Remove and Install
C32 Marine Engines Aftercooler - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.