Engine Oil Screen - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Note: Inspect all O-rings, seals, and gaskets for wear or damage. Replace if necessary.
- Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual , "Engine Oil and Filter - Change".
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g06172212 - Remove two bolts (1), disconnect two plugs (2), and remove box (6).
- Remove two bolts (3), disconnect coupling (4), and set harness and bracket (5) out of the way.
Show/hide table
Illustration 2 g06172506 - Remove nut (7), two coupling nuts (8), and remove cover (9).
Show/hide table
Illustration 3 g06172544 - Remove engine oil screen (10).
- Install engine oil screen (10) in reverse order of removal.
- Tighten nuts (7) and (8) to a torque of
47 ± 3 N·m (35 ± 2 lb ft) .
- Tighten nuts (7) and (8) to a torque of
Caterpillar Information System:
C8.7 and C12.9 Marine Engines Electronic Service Tools
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408} Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
C175 Tier 4 Final Engines for Off-Highway Trucks Dosing Control System Operation
New Software Is Now Used on Certain 3500 Generator Set Engines {1920} New Software Is Now Used on Certain 3500 Generator Set Engines {1920}
C13, C15, and C18 Generator Set Engines Variable Valve Actuator - Test
C13, C15, and C18 Generator Set Engines CID 1906 FMI 06 Intake Valve Actuator #6 Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1906 FMI 05 Intake Valve Actuator #6 Current Below Normal
C13, C15, and C18 Generator Set Engines CID 1905 FMI 06 Intake Valve Actuator #5 Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1905 FMI 05 Intake Valve Actuator #5 Current Below Normal
C13, C15, and C18 Generator Set Engines CID 1904 FMI 06 Intake Valve Actuator #4 Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1904 FMI 05 Intake Valve Actuator #4 Current Below Normal
C13, C15, and C18 Generator Set Engines CID 1903 FMI 06 Intake Valve Actuator #3 Current Above Normal
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701} Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Electric Retarder - Assemble - Grid Assembly
C9.3B Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
C8.7 and C12.9 Marine Engines Acceleration Is Poor or Throttle Response Is Poor
C8.7 and C12.9 Marine Engines Exhaust Has Excessive Black Smoke
C8.7 and C12.9 Marine Engines Fuel Consumption Is Excessive
C32 Marine Engine CAN Data Link - Test
C9.3B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C32 Marine Engine Cat Data Link - Test
C8.7 and C12.9 Marine Engines Intake Manifold Air Pressure Is Low
C175-20 Locomotive Engine Emissions Certification Film
C32 Marine Engine Coolant Level - Test