CID 1906 FMI 05 Intake Valve Actuator #6 Current Below Normal
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects Engine Intake Valve Actuator #1 : Current Below Normal
The ECM will log the diagnostic code.
The ECM monitors the current flow through the circuit for each actuator. If low current flow (open-circuit) is detected, a 5 diagnostic code is activated. The ECM continues to try to activate the actuator.
The ECM takes the following actions while the code is active:
- The ECM will derate the engine power by 10 percent.
- The amber warning lamp is illuminated.
Test Step 1. Perform the following diagnostic procedure: "Variable Valve Actuator - Test"
Results:
- OK - STOP
Caterpillar Information System:
C13, C15, and C18 Generator Set Engines CID 1905 FMI 06 Intake Valve Actuator #5 Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1905 FMI 05 Intake Valve Actuator #5 Current Below Normal
C13, C15, and C18 Generator Set Engines CID 1904 FMI 06 Intake Valve Actuator #4 Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1904 FMI 05 Intake Valve Actuator #4 Current Below Normal
C13, C15, and C18 Generator Set Engines CID 1903 FMI 06 Intake Valve Actuator #3 Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1903 FMI 05 Intake Valve Actuator #3 Current Below Normal
C13, C15, and C18 Generator Set Engines CID 1902 FMI 06 Intake Valve Actuator #2 Current Above Normal
C13, C15, and C18 Generator Set Engines CID 1902 FMI 05 Intake Valve Actuator #2 Current Below Normal
C13, C15, and C18 Generator Set Engines CID 1901 FMI 06 Intake Valve Actuator #1 Current Above Normal
C9.3B Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
CG137-08 and CG137-12 Engines Cold Weather Starting
3516B Generator Set Engines with Dynamic Gas Blending Air Shutoff - Test
C13, C15, and C18 Generator Set Engines CID 1906 FMI 06 Intake Valve Actuator #6 Current Above Normal
C13, C15, and C18 Generator Set Engines Variable Valve Actuator - Test
New Software Is Now Used on Certain 3500 Generator Set Engines {1920} New Software Is Now Used on Certain 3500 Generator Set Engines {1920}
C175 Tier 4 Final Engines for Off-Highway Trucks Dosing Control System Operation
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408} Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
C8.7 and C12.9 Marine Engines Electronic Service Tools
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Screen - Remove and Install
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701} Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Electric Retarder - Assemble - Grid Assembly
C9.3B Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
C8.7 and C12.9 Marine Engines Acceleration Is Poor or Throttle Response Is Poor
C8.7 and C12.9 Marine Engines Exhaust Has Excessive Black Smoke