New Engine Software in Now Used on Certain Commercial 3500 Series Engines {1920}
- Electric Power Generation
- 3516B GEN SET (S/N: ZAP1-2021)
- 3516C GEN SET (S/N: SBK1-2123)
- Engine
- 3508B (S/N: BGX1-157)
- 3512B (S/N: BRK1-353; 8RM1-1160; 6WN1-802; 5AW1-141; 6GW1-1859)
- 3512C (S/N: YBD1-473; SBG1-1384)
- 3516B (S/N: BMB1-131; 6HN1-1719; 7RN1-92002; PBR1-1000; 1NW1-203; 2JW1-422)
- 3516C (S/N: SBJ1-2045; SFJ1-934; SEK1-1280)
- 3512B (S/N: BRK1-353; 8RM1-1160; 6WN1-802; 5AW1-141; 6GW1-1859)
- Power Module
- PM3508 (S/N: BLM1-273)
- PM3512 (S/N: BNR1-353)
- PM3516 (S/N: BPD1-92001; NAM1-399; KEN1-232)
- PM3512 (S/N: BNR1-353)
Description Of Change: New engine software is now available and includes the following updates:
- Improved robustness of the DM1 message signal to the EMCP.
- Added support for SPN 3621 Differential Oil Pressure.
- Added support for Shutdown Override Feature to the configurable parameters.
- Improved robustness of Single Rating Software to Multi Rating Software flash over to retain the Rated Fuel Position parameter.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Refer to Table 1 for the new and former software numbers.
Show/hide table
New Part Number | Part Name | Former Part Number |
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp | ||
Software Gp |
Caterpillar Information System:
Well Stimulation Pumps Monitoring System
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor
A New Prelube Pump Is Now Used on Certain 3500 Engines {1319} A New Prelube Pump Is Now Used on Certain 3500 Engines {1319}
G3500H Generator Set Engine Sensor Calibration Required - Test
C7.1 Marine Engine Valve Mechanism Cover - Remove and Install
Marine Engine and Genset Control Panel IIIB General Information
Filter Covers and Housings are Difficult to Remove on Certain Large off-Highway Trucks {3067, 5068} Filter Covers and Housings are Difficult to Remove on Certain Large off-Highway Trucks {3067, 5068}
C175 Oil&Gas Offshore Engine Air Inlet and Exhaust System Operation
C175 Oil&Gas Offshore Engine Sensor (Data Link Type) - Test
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Sensor Calibration Required - Test - In Cylinder Pressure Sensor
Improved Fan Drive Group Bolts are Now Used on Certain 784 and 785 Off-Highway Trucks {1359} Improved Fan Drive Group Bolts are Now Used on Certain 784 and 785 Off-Highway Trucks {1359}
C175 Tier 4 Final Engines for Off-Highway Trucks Backflow Valve - Test
C7.1 Marine Engine Cylinder Head - Remove
C7.1 Engines and Generator Sets Aftertreatment Cooling Fan - Test
C7.1 Marine Engine Cylinder Head - Install
G3500H 50Hz Generator Sets Sensors and Electrical Components
G3500H Generator Set Engine Exhaust Temperature - Test
C7.1 Engines and Generator Sets Aftertreatment Identification Module - Test
A New Bearing Cage Assembly is Now Used in the Planetary Group on Certain Wheel Tractor-Scrapers and Off-Highway Trucks {3030, 3160} A New Bearing Cage Assembly is Now Used in the Planetary Group on Certain Wheel Tractor-Scrapers and Off-Highway Trucks {3030, 3160}
C7.1 Engines and Generator Sets ARD Fuel Supply - Test
The Large Painted on Arrow Used on Turbine Inlet Bellows on Certain C175 Engines Is Temporarily Being Removed {1059} The Large Painted on Arrow Used on Turbine Inlet Bellows on Certain C175 Engines Is Temporarily Being Removed {1059}
C7.1 Marine Engine Piston Cooling Jets - Remove and Install
C7.1 Engines and Generator Sets ARD Ignition - Test
SCR Retrofit Aftertreatment Overhaul (Major)