Fuel Injector
Show/hide table
Illustration 1 | g06058390 |
Show/hide table
Illustration 2 | g06058389 |
Tightening Sequence |
Show/hide table
Specification for 442-1754 Fuel Injector Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | 227-0135 Plug | Torque to |
2 | 4 | 107-0269 Bolt | Use the following procedure to tighten the bolts in the numerical sequence shown in illustration 2.
1. First tighten all bolts to 2.Tighten bolt 4 to 3. Tighten bolt 1 to 4. Tighten bolt 3 to 5. Tighten bolt 2 to 6. Tighten all bolts to final torque of |
Caterpillar Information System:
3500E Marine Engines Crankcase Breather
3524B and C175 Engines for Off-Highway Truck/Tractors Fuel Transfer Pump
3512E Tier 4 Final Engines for Land Electric Drilling Flywheel
3512E Engines for Well Stimulation Pumps Flywheel Housing Adapter
3512E Tier 4 Final Engines for Land Electric Drilling Vibration Damper
3512E Petroleum Engine Turbocharger
UPS 750 Uninterruptible Power Supply Inter-System Network Board
UPS 750 Uninterruptible Power Supply Battery Booster Interface
The Compressor By-Pass Valve Actuator Might Fail On Certain G3500B Engines {1803, 5510, 7602, 7610, 7620} The Compressor By-Pass Valve Actuator Might Fail On Certain G3500B Engines {1803, 5510, 7602, 7610, 7620}
C11 and C13 Engines for Caterpillar Built Machines Fuel Filter Is Restricted
3512E Engines Cylinder Liner - Remove and Install
XQP500 Generator Sets Safety Messages
UPS 750 Uninterruptible Power Supply Transducer - Remove and Install
3512E Engines Camshaft Bearings - Remove and Install
UPS 750 Uninterruptible Power Supply Snubber Capacitor - Remove and Install
3512E Engines Camshaft - Remove and Install
3512E Petroleum Engine Exhaust Bypass
UPS 750 Uninterruptible Power Supply Air Filter - Clean
UPS 750 Uninterruptible Power Supply Cable and Bus Connections - Check
XQP500 Generator Sets Maintenance Interval Schedule
3512E Engines for Well Stimulation Pumps Flywheel Housing
3516C Locomotive Engine and Generator Set Maintenance Recommendations
C175-16 Generator Set Maintenance Interval Schedule - Standby
New Marine Engine Control Panel Software Is Used on Certain Marine Engines {7490} New Marine Engine Control Panel Software Is Used on Certain Marine Engines {7490}