Alternator - Remove and Install
Start By:
- Remove Clutch (Supercharger)
- Remove cable assembly (1), cable assembly (2), and cable assembly (3).
Show/hide table
Illustration 2 g06011217 - Loosen clamp (4). Loosen collar (6) and remove pipe assembly (5).
Show/hide table
Illustration 3 g06037969 - Remove clamps (7). Remove bolt (8). Remove pulley (9) and belt tensioner assembly (10).
Show/hide table
Illustration 4 g06038110 - Remove nut (11). Remove Bolt (13) and bracket (12). Remove tube assembly (14).
Show/hide table
Illustration 5 g06038148 - Remove pulley (16) and bolt (15). Remove bolts (17) and bolts (22). Remove bolt (18), bolt (19), and bolt (20). Remove support (21).
Show/hide table
Illustration 6 g06038166 - Remove nut (23) and bolt (25). Remove alternator assembly (24).
Show/hide table
Illustration 1 | g06038462 |
- Install alternator assembly (24) in the reverse order of removal.
- Tighten bolt (25) to a torque of
46 ± 5 N·m (34 ± 3 lb ft) . - Tighten bolts (20), (19), (18), and (15) to a torque of
75 ± 8 N·m (55 ± 6 lb ft) . - Tighten bolt (17) to a torque of
23 ± 2 N·m (204 ± 20 lb in) . - Tighten belt tensioner assembly (10) to a torque of
62 ± 5 N·m (46 ± 4 lb ft) . - Tighten pulley (9) to a torque of
45 ± 5 N·m (33 ± 4 lb ft) . - Tighten clamps (7) to a torque of
3 ± 0.25 N·m (29 ± 2 lb in) .
- Tighten bolt (25) to a torque of
Caterpillar Information System:
C1.7 and C2.2 Industrial Engine Speed/Timing - Test
C175-20 Locomotive Engine Fuel Pressure Is High
C175-16 Locomotive Engine Exhaust Differential Temperature Is High
G3508J, G3516J, and G3520J Engines Aftercooler - Remove and Install
C175-20 Locomotive Engine DEF Tank Level Is Low
XQ570 Rental Generator Set Safety Messages
C175-16 Locomotive Engine Crankcase Pressure Is High
Energy Storage System Fuse - Replace
Energy Storage System Current Sensor - Replace
Energy Storage System Contactor - Replace
Energy Storage System Carbon Dioxide (CO2) Scrubber - Replace
C12.9 Marine Engines Air Cleaner - Remove and Install
C18 Generator Set Maintenance Interval Schedule - Auxiliary
G3512 Generator Set Engines Detonation - Test
G3512 Generator Set Engines Electrical Power Supply - Test
C175-16 Locomotive Engine Fuel Temperature Is High
G3512 Generator Set Engines Exhaust Temperature Is High
G3512 Generator Set Engines Exhaust Temperature Is Low
G3512 Generator Set Engines Fuel Metering Valve - Test - TecJet Valve
C175-16 Locomotive Engine Oil Filter Differential Pressure Problem
Cat® Command For Hauling MID 039 - CID 0839 - FMI 02
C175-16 Locomotive Engine NOx Sensor - Test
G3516 TA Engine Ignition Secondary - Test
G3516 TA Engine Intake Manifold Air Temperature Is High