 | |
| Illustration 1 | g02446959 |
(1) Serial number plate (2) Information plate | |
The engine serial number plate is located on the right side of the engine block, toward the back.
 | |
| Illustration 2 | g00123229 |
Serial number plate | |
The following information is stamped on the serial number plate: engine serial number, engine model and arrangement number.
The engine information plate is located on top of the valve cover near the middle of the engine.
 | |
| Illustration 3 | g01347963 |
Engine information plate | |
The following information is on the information plate: engine serial number, engine model, engine arrangement number, maximum altitude of the engine that is necessary to achieve the rated power, horsepower, high idle, full load rpm, fuel settings and other information
 | |
| Illustration 4 | g03865111 |
View of the exhaust system of a C13 Well Service Engine (3) Clean Emission Module (CEM) identification plate | |
The Clean Emission Module (CEM) identification plate is located on the electronics plate for the CEM.
 | |
| Illustration 5 | g02236574 |
CEM plate | |
The CEM identification plate contains the following information: part number, serial number, change level and configuration ID code. This information may be needed by the Cat dealer when inquiries are being made on the CEM.
 | |
| Illustration 6 | g03354103 |
DEF module (3) plate location | |
The DEF module identification plate (3) contains the following information: part number, serial number and change level. This information may be needed by the Cat dealer when inquiries are being made on the DEF.
 | |
| Illustration 7 | g03354108 |
DEF plate | |